|
|
Post by savscooterdemon on Mar 10, 2015 22:25:18 GMT -5
Question: whats all need to prep for a top end renew, i know ill need new rings and gaskets but do i need things like a hone and if so what is the proper way to hone a cylinder and also renewing the valves and valve hardware. Any help is very appreciated.
|
|
|
|
Post by iwannascoot on Mar 10, 2015 22:29:32 GMT -5
You can get a 47mm BBK from Valley Scooters in Brunswick for $30 shipped. It includes cylinder, piston, rings, gaskets, etc. You can get a new head with valves for another $30.
Billy
|
|
|
|
Post by walleye1963 on Mar 10, 2015 23:54:26 GMT -5
Just sent for one at valley scooters got it in 3 days.looks good.
|
|
|
|
Post by savscooterdemon on Mar 11, 2015 10:10:54 GMT -5
Ive been doing business with scrappydogscooters
|
|
|
|
Post by savscooterdemon on Mar 12, 2015 15:26:38 GMT -5
Replaced the cvt cover and got the fixins to do a top end reseal also put a 105cca battery in today ,looking to get my scoot all sealed up so i can stop that oil leak
|
|
|
|
Post by savscooterdemon on Mar 21, 2015 9:26:18 GMT -5
What a difference a new cvt belt can make. I went from 36 to 38 mph screaming the engine to 45+ mph at a nice engine speed
|
|
|
|
Post by randallovelace on Mar 22, 2015 0:55:52 GMT -5
 Same style scooter I have. |
|
|
|
Post by savscooterdemon on Mar 22, 2015 12:41:32 GMT -5
Can i mount a 12 inch rim to a short case gy6 if i use a low pro tire ind if so were can i find both the rims and tires. Cause i want bigger rims for a better look and are there any mods i need to do to accomplish this feat or is it bolt on. Any tips would be nice
|
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:08:12 GMT -5
 This is the frame in building for my speed demon |
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:11:44 GMT -5
|
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:14:48 GMT -5
 This is the engine for my hi performance build. Ife cleaned it thorough thoroughly and closed it up to keep dust and dirt from entering the engine while i wait for parts |
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:15:30 GMT -5
|
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:20:03 GMT -5
 Hear is a couple of small mod i did to my lance gtr50. Ive replaced the cvt cover and belt,put in a 91 main jet, and moded the stock air box wadda think. |
|
|
|
Post by savscooterdemon on Mar 22, 2015 13:22:07 GMT -5
Ok than it loaded the pic upside down lol. Sorry bout that
|
|
