|
|
Post by scooternub on May 22, 2015 15:56:38 GMT -5
Step one completed.
On my now running second 2009 Jinlun Sunny jl50qt-8, i had to splice in cdi plugs and install a working cdi unit. it took about an hour of kick starting it, adjusted idle speed screw a little vroom vroom, took it for a test drive, runs well, returned idle speed scew where it was,shut it off, kick started it one time it fired right up.
Soon I will begin a bbk project with it.
stay tuned.
|
|
|
|
Post by Elektrey on May 22, 2015 16:26:43 GMT -5
keep us  ! also, moar pics! |
|
|
|
Post by scooternub on May 23, 2015 5:02:26 GMT -5
keep us ! also, moar pics! Definitely will. Can't wait to get it started. |
|
|
|
Post by scooternub on May 24, 2015 15:52:18 GMT -5
project is canceled. not enough confidence.
|
|
|
|
Post by katastroff on May 24, 2015 16:10:09 GMT -5
project is canceled. not enough confidence. If you go to the tech section and read up on them 'how-to", you'll do that with your eyes closed. When i bought my first BBK, i had the box in my computer room for over a month. Everyday after work i would read up the BBK installation tutorial. I took a few notes like, how to set up the rings and at what angle, ring gap but that was it. I had this thing printed in my mind just as if i had watched brent do it over and over. When the time came, i slaped on the BBK, kickstarted it a few times and VROOOM!!! It was alive and running good. Now you drag your butt to the tech section and read up NOW !!!!  |
|
|
|
Post by albongo on May 24, 2015 19:14:52 GMT -5
What katastroff said! plus if you are stuck or unsure about anything everyone on this forum is really helpful. I am testament to that. |
|
|
|
Post by 90GTVert on May 25, 2015 6:57:23 GMT -5
|
|
|
|
Post by iwiketuddlz on May 25, 2015 15:18:17 GMT -5
Imagine ..... Braaaap brap braaaaaaaaapppp
|
|
|
|
Post by scooternub on May 31, 2015 5:14:00 GMT -5
Reopened.
Buying the kit today. I was thinking **** it lol, just do it.
|
|
|
|
Post by scooterpimp on May 31, 2015 6:53:20 GMT -5
The KFC offer is still on the table.  |
|
|
|
Post by scooternub on May 31, 2015 10:27:27 GMT -5
Step two completed.
Purchased the 80cc bbk. from scrappydogscooters.
yehaw!
|
|
|
|
Post by niz76 on May 31, 2015 13:42:05 GMT -5
There ya go!
|
|
|
|
Post by scooternub on Jun 4, 2015 8:46:51 GMT -5
New parts are on their way. Update: Friend of mine, introduced me to an old timer farmer/motorcycle guy, that said he will help me with the bbk and jetting/carb tuning.  |
|
|
|
Post by scooternub on Jun 5, 2015 13:49:10 GMT -5
bbk & jets came in along with my new feeler gauge.
Torque wrench will be bought soon, then i may begin.
|
|
|
|
Post by scooternub on Jul 13, 2015 17:34:03 GMT -5
welp, just ready for tomorrow.   |
|
