otto
Scoot Member
Posts: 72 
|
Post by otto on Jun 5, 2015 20:12:54 GMT -5
|
|
|
|
Post by niz76 on Jun 5, 2015 23:15:19 GMT -5
Haha That thing is looking pretty cool! Are you using the 49cc 139qmb for the engine? A whole BBK kit can be had on ebay for $55... you can get a BBK cylinder and use the stock head for $30 from a vendor here. Valley scooters I think? Some CVT tuning can go a long way for very cheap... Sorry, idk much about porting and polishing the qmb's  |
|
|
|
Post by redneck on Jun 5, 2015 23:43:47 GMT -5
port and polish will give u better throttle response and maybe a little top end but with a stock bore very minimal gains but comebind with some cvt tuneing like niz76 said you can probably get a gain of 5 to 10 tops mph
|
|
|
|
Post by joeorange on Jun 6, 2015 9:30:23 GMT -5
i found out what im going to do with my 1e40qmb after my 150 gy6 swap.  |
|
otto
Scoot Member
Posts: 72
|
Post by otto on Jun 6, 2015 10:35:48 GMT -5
Thanks for the advice. I'm checking out the CVT videos on you tube.  |
|
otto
Scoot Member
Posts: 72
|
Post by otto on Jun 7, 2015 20:40:53 GMT -5
|
|
|
|
Post by runningbuck on Jun 7, 2015 21:36:08 GMT -5
looking great
|
|
|
|
Post by Clank on Jun 7, 2015 23:42:42 GMT -5
Great story and build. I even like the "Clank Green", but not sure about that pink top....
Can't wait to read about the finished project.
|
|
|
|
Post by Sitticuss on Jun 8, 2015 5:57:22 GMT -5
Sweet...It's nice to see something different on here.
|
|
|
|
Post by 90GTVert on Jun 8, 2015 9:54:38 GMT -5
Very intersting. Nice work. Any chance we'll get to see a vid of this thing in action when it's ready?
|
|
otto
Scoot Member
Posts: 72
|
Post by otto on Jun 8, 2015 10:43:57 GMT -5
Hopefully,I will have some video of the maiden journey.I can't believe how lazy I have gotten since last summer. I'm telling you guys, Eat right, quit eating at the fast food places so much. You are never the same after they open you up. OK, time to quit complaining. It's time to put on some hoses and change some fluids.  |
|
|
|
Post by redneck on Jun 9, 2015 19:36:26 GMT -5
 video  |
|
otto
Scoot Member
Posts: 72
|
Post by otto on Jun 14, 2015 12:57:30 GMT -5
So as I said before I am broke only able to put about 30-40 dollars every couple of weeks. Some times less. Now I was all excited to get her cranked up. Had the lines and fluids changed. whet to start.Then no start. I did not have to look far the vacuum fuel pump not pumping!  Now it's a new pay day. Now i get to order some parts. Just to give you a kind of look at what I have left. Here is my to do list.Needs battery,tie rod ends inner and outer,fuel pump,fiber glass resin and hardener,dual cable brake leaver, front brake cables, Still quit the list just to get it to scooter level. But I am still moving forward. |
|
|
|
Post by aeroxbud on Jun 14, 2015 19:38:55 GMT -5
One step at a time. You will get there and have a really cool vehicle in the end  |
|
otto
Scoot Member
Posts: 72
|
Post by otto on Jun 16, 2015 16:36:23 GMT -5
I just got done ordering parts. Not all the the parts I need but enough to get her going. Ordered The brake leaver, brake cables,20mm carb.,and fuel pump.I fixed the Pink headlight.  |
|
Now it's a new pay day. Now i get to order some parts. Just to give you a kind of look at what I have left. Here is my to do list.Needs battery,tie rod ends inner and outer,fuel pump,fiber glass resin and hardener,dual cable brake leaver, front brake cables, Still quit the list just to get it to scooter level. But I am still moving forward. 
