|
|
Post by tiny on Jul 27, 2015 17:26:40 GMT -5
Looking for a BBk for my '88 Jog CG50. I can't seem to find one for the Vertical engine only the Horizontal. Help is greatful
|
|
|
|
Post by usmcdoc on Jul 27, 2015 17:51:42 GMT -5
|
|
|
|
Post by derbiman on Jul 27, 2015 18:01:38 GMT -5
Scrappy has a 70cc kit for the vertical engine listed under Japanese and European scooters. I am not sure if this will work for you or not,but it would not hurt to check.
|
|
|
|
Post by derbiman on Jul 27, 2015 18:13:35 GMT -5
Oh,I did not see that it is for 98-01. Sorry. The kit that usmcdoc found calculates to $127. Not too bad if the shipping is reasonable.
|
|
|
|
Post by tiny on Jul 28, 2015 3:41:37 GMT -5
$127 USD I'm in Canada so about $160 plus shipping. Its for the wife so ill see f she whats to shell out for the kit.
|
|
|
|
Post by pgs on Jul 29, 2015 12:45:35 GMT -5
|
|
|
|
Post by tiny on Jul 29, 2015 15:50:04 GMT -5
I like the looks of the second one it may work for my wife. She also likes it and will think about it.
Thanks guys.
|
|
|
|
Post by usmcdoc on Jul 29, 2015 16:05:21 GMT -5
I like the looks of the second one it may work for my wife. She also likes it and will think about it. Thanks guys. Hold up on that kit.. I could be wrong but.. the 1988 CG50 Jog Scoots I have seen were VERTICAL..not HORIZONTAL engines.. If yours is vertical.. a horizonatl kit would not fit or work... |
|
|
|
Post by pgs on Jul 29, 2015 16:35:28 GMT -5
I like the looks of the second one it may work for my wife. She also likes it and will think about it. Thanks guys. Hold up on that kit.. I could be wrong but.. the 1988 CG50 Jog Scoots I have seen were VERTICAL..not HORIZONTAL engines.. If yours is vertical.. a horizonatl kit would not fit or work... good catch didn't even notice just saw for jog |
|
|
|
Post by Lucass2T on Jul 29, 2015 21:54:55 GMT -5
Tons and tons of mina vert cylinders are on the market. Even the stage 6 racing.
|
|
|
|
Post by tiny on Jul 30, 2015 3:31:36 GMT -5
It says it is compatible with the CG50. Don't fret about me I always contact and check for sure if a part will fit my scooters.
|
|
|
|
Post by usmcdoc on Jul 30, 2015 6:15:30 GMT -5
treatland.com carries LOTS of older Scoot stuff..  |
|
|
|
Post by birdman on Jul 30, 2015 7:02:50 GMT -5
88 jogs are vertical. any vertical zuma kit for cw50 will fit. trust me. i have the same scooter. Pre bug zuma bbk, and Jog90 variators fit the bill. Also horizontal jog tuning items such as torque spring and clutch springs work great too.
|
|
|
|
Post by birdman on Jul 30, 2015 7:05:55 GMT -5
also cw50 pipes fit too with minimal modification, just a spacer here and a spacer there. and cw50 intake manifolds fit as well
|
|
|
|
Post by tiny on Jul 30, 2015 17:05:26 GMT -5
I will keep that in mind thanks Birdman. Also what year CW50 you talikn' about Birdman?
|
|
