|
|
Post by Reign on Oct 18, 2009 12:21:53 GMT -5
So I was putting my CVT back together after changing to 2000RPM clutch springs and 5G slider weights, I was 5 seconds from finished tightening my variator nut, when my strap wrench jerked to the side and busted off half of one of the fan "blades" Should I be worried that this might cause an issue, or does it not really matter? I have spare engines that I can grab another fan off of, but I'm lazy  |
|
|
|
Post by 90GTVert on Oct 18, 2009 15:14:40 GMT -5
Half of a fan blade shouldn't cause any trouble. I guess it'd be out of balance a little, but it's probably out of balance anyway.
|
|
|
|
Post by Reign on Oct 18, 2009 15:25:43 GMT -5
Half of a fan blade shouldn't cause any trouble. I guess it'd be out of balance a little, but it's probably out of balance anyway. Alright thanks Brent. I was just a little worried that I might have to take apart another engine just for the fan. |
|
|
|
Post by silverspar1 on Oct 23, 2009 1:30:47 GMT -5
I would'nt worry about it too much. I don't think they do a whole lot anyway. My Daelim S-Five did'nt even have one.
|
|
