|
|
Post by 2strokd on Dec 2, 2009 10:58:17 GMT -5
|
|
|
|
Post by 90GTVert on Dec 2, 2009 11:16:31 GMT -5
You might wanna contact them and see whta the other measurements are just to be sure. Probably about stock quality.
It won't let me proceed to checkout to see a price on shipping right now. I've dealt with DDM for pocketbike stuff and I know it was reasonable, so it's probably not $20 but I'm sure it's a few bucks at least.
|
|
|
|
Post by 2strokd on Dec 2, 2009 12:27:56 GMT -5
You might wanna contact them and see whta the other measurements are just to be sure. Probably about stock quality. It won't let me proceed to checkout to see a price on shipping right now. I've dealt with DDM for pocketbike stuff and I know it was reasonable, so it's probably not $20 but I'm sure it's a few bucks at least. K thanks. Even at stock quality thats a pretty good deal, no? The cheapest i have found is wolfpack on ebay for like $10. I want a good one but cant seem to find it for under $20  |
|
|
|
Post by Fox on Dec 2, 2009 15:05:26 GMT -5
The text reads:
"Piston pin bearing for 47cc pocketbike crankshafts with 10mm piston pin."
That tells me that it's for an engine with a pull starter like a large Weed Whacker or chain saw type engine.
|
|
|
|
Post by 90GTVert on Dec 2, 2009 15:45:15 GMT -5
Some of those weed whackers make more power than our scooters though, so if it would fit I don't think it's inherently weak just 'cause it's from a small bike. Just guessing though. I have no experience with the 47cc 2 strokes.
|
|
|
|
Post by Fox on Dec 2, 2009 17:17:48 GMT -5
Right! I was just being doubtful that it would fit.
|
|
. Probably $20 for shipping 
. Probably $20 for shipping 
