theo547
Scoot Enthusiast
Posts: 497
|
Post by theo547 on Jun 12, 2011 11:25:31 GMT -5
I just installed the 2k (red) springs and coils... holy shit this thing takes off now, but its hitting 9k rpms at 30mph
can i get some thoughts on how to get a little more top speed.
|
|
theo547
Scoot Enthusiast
Posts: 497
|
Post by theo547 on Jun 12, 2011 11:37:02 GMT -5
before i post i should research  Ok i need to try some more heavy weights... the 4g in there are to light... ill try the opposite and go with my 7g see what it does... post back in a bit |
|
|
|
Post by reveeen on Jun 12, 2011 15:05:32 GMT -5
Roughly 1g per step.
4g= stock take-up spring
5g=#1000 take-up
6g=#1500 take-up
7g=#2000 take-up
It depends on your preference...... my starting point is 3.5g
|
|
theo547
Scoot Enthusiast
Posts: 497
|
Post by theo547 on Jun 12, 2011 15:51:43 GMT -5
ok i have 5.5g in there (half 5g half 6g - spaced evenly) my 0-5 is still pretty doggy but, holy shit with that thing kicks in5-30 is just about instant and from a stand still to the end of the block im at almost 40. This thing is starting to run like a champ  |
|
|
|
Post by reveeen on Jun 14, 2011 3:19:50 GMT -5
my 0-5 is still pretty doggy
Clutch springs..... try some heavier clutch springs. If your clutch engages before your engine enters it's power band it wouldn't pull a sick whore off of a pi55 pot.
|
|
