Benjis bugeye zuma

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 14, 2017 21:31:23 GMT -5 via mobile

Quote

Post by benji on Dec 14, 2017 21:31:23 GMT -5

New bars

Last Edit: Jun 13, 2018 21:32:26 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

'O'Verse
Scootaholic!

1cc = 1mph

Posts: 2,603

Benjis bugeye zuma Dec 14, 2017 22:23:15 GMT -5

Quote

Post by 'O'Verse on Dec 14, 2017 22:23:15 GMT -5

Dec 14, 2017 21:27:34 GMT -5 benji said:

Found a matching front caliper in my parts pile. Also put on new bars and my OR that just came in. I still need new grips and maybe a new cnc quick throttle.

If that's not the one. There should be a relatively new Brembo caliper on the forks I gave you....! I say paint that stem black or white. I think white would look sick with the bars. (2cents)

Last Edit: Dec 14, 2017 22:24:40 GMT -5 by 'O'Verse

(1993) Yamaha Jog-Complete Malossi “Rc-One” 94cc engine-Powder coated frame & 13″Gyronectics black diamond rims-Aluminum Forks, triple tree, axle & frame braces-Malossi RS1 rear shock-Renthal handlebars-Str8 neck short-Adelin levers, front caliper, & brake cables, R & D Italy front & back discs-Yamaha Zuma bolt on radiators-Stage6 dual temp/ tach gauge, & kickstarter-Koso in line water temp. sensor-Custom sleeved wiring-Tusk enduro rechargeable lighting kit.

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 14, 2017 23:18:56 GMT -5 via mobile 'O'Verse likes this

Quote

Post by benji on Dec 14, 2017 23:18:56 GMT -5

Ya this bike is starting to get too nice for the tng Venice stem haha. I may have to pony up for a nice stem. This caliper was from those forks I think! It was in the big box of stuff.

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 14, 2017 23:58:17 GMT -5 via mobile

Quote

Post by benji on Dec 14, 2017 23:58:17 GMT -5

I think I'm gonna not have any switches on the bars, just the throttle and brakes. This bike doesn't have front turn signals and I was kinda iffy on putting some on anyways, I always use hand signals anyway (I'm kind of a squid like that haha) and i like the look of the bars naked w just a cnc throttle and grips.

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 15, 2017 14:38:28 GMT -5 via mobile aeroxbud and 'O'Verse like this

Quote

Post by benji on Dec 15, 2017 14:38:28 GMT -5

Simple rear caliper bracket, 8mm bolts

Last Edit: Jun 13, 2018 21:33:11 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 15, 2017 15:18:34 GMT -5 via mobile 90GTVert, Jwhood, and 1 more like this

Quote

Post by benji on Dec 15, 2017 15:18:34 GMT -5

Bracket for my cht and tach, gonna put it below my bars

Last Edit: Jun 13, 2018 21:33:36 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 16, 2017 13:55:54 GMT -5 via mobile 90GTVert, Jwhood, and 2 more like this

Quote

Post by benji on Dec 16, 2017 13:55:54 GMT -5

Last Edit: Jun 13, 2018 21:33:58 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 18, 2017 21:21:21 GMT -5 via mobile

Quote

Post by benji on Dec 18, 2017 21:21:21 GMT -5

New grey n white Scott grips w foam donuts

Last Edit: Jun 13, 2018 21:34:20 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 19, 2017 15:16:25 GMT -5 via mobile aeroxbud, Jwhood, and 1 more like this

Quote

Post by benji on Dec 19, 2017 15:16:25 GMT -5

Rear caliper finally mounted

Last Edit: Jun 13, 2018 21:34:40 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 19, 2017 20:55:17 GMT -5 via mobile

Quote

Post by benji on Dec 19, 2017 20:55:17 GMT -5

Still waiting on my new cnc throttle and a pair of h4 led bulbs to show up. Also ordered another aerox rear caliper as I messed up this one's threads for the banjo bolt.

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

ryan_ott
Scoot Master!

Posts: 5,195

Benjis bugeye zuma Dec 19, 2017 22:13:30 GMT -5 via mobile

Quote

Post by ryan_ott on Dec 19, 2017 22:13:30 GMT -5

Not sure which throttle your going with but I’m running one of these. It was pretty easy to get the throttle cable setup and it’s a nice smooth pull.

www.treatland.tv/domino-gas-cross-throttle-assembly-with-grips-p/domino-throttle-2311.03-02.htm

2008 Yamaha Zuma
2008 Metruck
2019 Yamaha MT07
1994 Yamasaki - RD250 swapped Ninja

Flip over and eat sh*t

drc174 Scoot Pro Posts: 1,254 Location: Atlanta, GA	Benjis bugeye zuma Dec 19, 2017 22:43:26 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by drc174 on Dec 19, 2017 22:43:26 GMT -5 I used this successfully on two bikes, cheap af www.amazon.com/Quick-Action-Throttle-Black-Grips/dp/B01K9SJULM/ref=sr_1_37?ie=UTF8&qid=1513741359&sr=8-37&keywords=quick+throttle
	Follow the shenanigans on Youtube. No Drama, no clickbait, just scooters. www.youtube.com/c/ThatScooterThing

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 20, 2017 0:07:52 GMT -5 via mobile

Quote

Post by benji on Dec 20, 2017 0:07:52 GMT -5

What cable do you use with that one? I'm waiting for one like this to show up. Supposedly "ncy" brand, but I have my doubts. $8.90 shipped

Last Edit: Jun 13, 2018 21:35:14 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50

ryan_ott
Scoot Master!

Posts: 5,195

Benjis bugeye zuma Dec 20, 2017 12:00:12 GMT -5 via mobile

Quote

Post by ryan_ott on Dec 20, 2017 12:00:12 GMT -5

I’m using this cable.

www.dynoscooter.com/collections/yamaha-zuma-1/products/copy-of-honda-dio-af16-high-flow-cooling-fan

The one that drow sells was too short for me, ^ one was a better fit for me with a PHBG, but I tried it on a PWK and it seemed to fit that also.

2008 Yamaha Zuma
2008 Metruck
2019 Yamaha MT07
1994 Yamasaki - RD250 swapped Ninja

Flip over and eat sh*t

benji
Scootaholic!

Posts: 3,154

Benjis bugeye zuma Dec 20, 2017 17:02:15 GMT -5 via mobile Jwhood likes this

Quote

Post by benji on Dec 20, 2017 17:02:15 GMT -5

I'm running a similar style cable on mine now, I'm hoping it works with my new one.

Polished cvt cover

Last Edit: Jun 13, 2018 21:35:34 GMT -5 by benji

05 zuma w athena bbk, polini For Race 4, 21mm pwk, malossi OR, 14/42 gears, aerox wheels, aerox brakes, steel braided lines, Derbi gp-1 master cylinders, rear disc, 32:1, Malossi fly clutch w black springs, lightened OEM flywheel, advanced timing, naked voca bars, yellow hids, smoked clear tail, aerox cf front fender, no rear fender, viper strike tires, lowered "2, side stand, all stainless hex bolts, black mica '08 plastics w '02 belly pan, recovered seat.
'87 elite
'88 elite sa50