|
|
Post by katzklaw on Jul 26, 2018 12:47:25 GMT -5
so hi. long story short about a month ago i bought a Peace Renegade 50cc in non-running condition for super cheap. it's technically the 2nd chinese scooter i've owned... the first was a 150cc unit i bought a good 12 or 13 years ago, and ended up selling a year later. the problem with this one turned out to be a simple quick fix and i was happily putt-putting around my local area for the next few weeks. then not too long ago i went to ride it, and it was completely utterly dead. turned out to be a fuse. replaced fuse, and it popped again immediately. investigated, and found a seriously fubared wiring harness. bought a new wiring harness.... and it doesn't match up.
sorry to spring a technical question on you all for my first post, but does anyone have any ideas what i can do? i'm missing riding!
|
|
|
|
Post by tortoise2 on Jul 26, 2018 12:54:18 GMT -5
Peace Renegade 50cc . . bought a new wiring harness.... and it doesn't match up
Vendor link? |
|
|
|
Post by humanshield on Jul 26, 2018 13:01:31 GMT -5
Basically, most of the harnesses are the same with some connector differences. You can probably make the harness work with some changes. If not, I have quite a few harnesses laying around I could send you for about $20 (covers shipping)
If you want to post some pics of the harness and especially the connectors I could look and see if I have a match.
|
|
|
|
Post by 90GTVert on Jul 26, 2018 13:17:19 GMT -5
 Exactly what doesn't match up may be good to know for anyone hoping to help.
|
|
|
|
Post by katzklaw on Jul 26, 2018 17:21:55 GMT -5
thanks for the warm welcome! i'll get some photos as soon as i am able... i'm on my lunch break from work right now. earliest would likely be tomorrow.
|
|
|
|
Post by katzklaw on Aug 1, 2018 14:16:27 GMT -5
well that took longer than i expected. sorry. my problem is, the wiring harness that supposedly is the correct one for my scooter doesn't have fittings for these connectors on the switches:   the connectors on the harness i received are much larger and more square. i'll provide a pic later if needed, but it was the "correct" harness for my model from an online vendor |
|
|
|
Post by tortoise2 on Aug 1, 2018 15:59:51 GMT -5
|
|
|
|
Post by katzklaw on Aug 1, 2018 19:25:05 GMT -5
|
|
|
|
Post by katzklaw on Aug 31, 2018 15:55:44 GMT -5
so i ordered ^ that harness... and it's the exact same one as the one i ordered before from the other vendor... and still doesn't match what i have. any suggestions?  |
|
wahlman
Scoot Enthusiast
Posts: 111
Location: Miami, Florida
|
Post by wahlman on Sept 1, 2018 12:05:13 GMT -5
Wow thats a tough situation.
The only thing i can think of is to try to contact the manufacturer themselves or to go to a local dealer that carries the brand.
Else if you could just get a wiring diagram you could cut and crimp the wires on the "wrong" harness that you have.
|
|
