Hi/Lo beams

jdl357 Scoot Veteran 2009 Keeway matrix ,80cc bbk, technigas q-tre pipe Posts: 552	Hi/Lo beams Aug 2, 2018 16:04:44 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jdl357 on Aug 2, 2018 16:04:44 GMT -5 My Kymco people 4t doesn't have a hi beam switch at all. Is there a way to make one?

gsx600racer
Scootaholic!

I'm totally seriously (Cartman)

Posts: 3,617

Hi/Lo beams Aug 2, 2018 16:27:18 GMT -5 90GTVert likes this

Quote

Post by gsx600racer on Aug 2, 2018 16:27:18 GMT -5

I did it to both of my Kymco's. It was pretty easy.

49ccscoot.proboards.com/thread/15359/2005-kymco-zx50-build-updated?page=2

2001 Honda Elite,Airsal 46mm Alum, ZX trans swap,(the Mrs. ride)
2003 Kymco ZX50,72cc Polini Corsa/case matched to cyl,21mm carb,Tecngas Next-R exhaust,a little variator tuning
2005 Kymco ZX50,72cc Polini Corsa/case matched to cyl,28mm carb,PG Short exhaust,16/32 gears,a little variator tuning
2008 Keeway Flash 50,Stock. CL flip or mina project. TBD
2003 Vento Zip R3,Original Form. CL flip or mina project. TBD
2006 TGB R50X,Derestricted ?,70cc,MRP Exhaust,17.5mm Carb, Stock CVT.

jdl357 Scoot Veteran 2009 Keeway matrix ,80cc bbk, technigas q-tre pipe Posts: 552	Hi/Lo beams Aug 2, 2018 17:12:57 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jdl357 on Aug 2, 2018 17:12:57 GMT -5 Thanks man!

jdl357 Scoot Veteran 2009 Keeway matrix ,80cc bbk, technigas q-tre pipe Posts: 552	Hi/Lo beams Aug 2, 2018 17:51:49 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jdl357 on Aug 2, 2018 17:51:49 GMT -5 That thread doesn't show the way to wire it though? Also, can I just wire it so hi and low beams are on full time?

gsx600racer
Scootaholic!

I'm totally seriously (Cartman)

Posts: 3,617

Hi/Lo beams Aug 2, 2018 17:56:50 GMT -5 90GTVert and jdl357 like this

Quote

Post by gsx600racer on Aug 2, 2018 17:56:50 GMT -5

I wouldn't suggest that. Pick Hi or Low. There is only so much power there. You're basically splitting the same power between both beams, it wont be as bright with both beams lit. Makes more sense to send power to just one.

www.49ccscoot.com/manuals/Kymco_People_S_50-200_Service_Manual.pdf

page 187

Last Edit: Aug 3, 2018 0:14:33 GMT -5 by gsx600racer

2001 Honda Elite,Airsal 46mm Alum, ZX trans swap,(the Mrs. ride)
2003 Kymco ZX50,72cc Polini Corsa/case matched to cyl,21mm carb,Tecngas Next-R exhaust,a little variator tuning
2005 Kymco ZX50,72cc Polini Corsa/case matched to cyl,28mm carb,PG Short exhaust,16/32 gears,a little variator tuning
2008 Keeway Flash 50,Stock. CL flip or mina project. TBD
2003 Vento Zip R3,Original Form. CL flip or mina project. TBD
2006 TGB R50X,Derestricted ?,70cc,MRP Exhaust,17.5mm Carb, Stock CVT.

jdl357 Scoot Veteran 2009 Keeway matrix ,80cc bbk, technigas q-tre pipe Posts: 552	Hi/Lo beams Aug 3, 2018 9:25:19 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jdl357 on Aug 3, 2018 9:25:19 GMT -5 Thank you gsx600!

Post by jdl357 on Aug 2, 2018 16:04:44 GMT -5

Post by gsx600racer on Aug 2, 2018 16:27:18 GMT -5

Post by jdl357 on Aug 2, 2018 17:12:57 GMT -5

Post by jdl357 on Aug 2, 2018 17:51:49 GMT -5

Post by gsx600racer on Aug 2, 2018 17:56:50 GMT -5

Post by jdl357 on Aug 3, 2018 9:25:19 GMT -5

Shoutbox