|
Post by magoconnor on Aug 26, 2018 8:08:17 GMT -5
Hello.
Has anybody experience with this carburetor? If so is it a "real" 20mm or just another fake 18mm with big pants on?
The glixal 20mm cost about the same as there 24mm, but I dont if that would be overkill. My setup: 80cc bvh a9 cam performance exhaust
|
|
|
Post by GrumpyUnk on Aug 27, 2018 13:22:58 GMT -5
I ordered a couple from aliexpress, and they were 'Keihin' per the site, were 20mm, but I think they may not have been made in a Keihin factory. They worked well, and reliably started the herd that had been parked for some time(purchased non-running) if installed. Older carbs had plugged pilot jets and would barely start if they started at all. I'd say the quality was okay. I got the pair, to my door, for less than $46. Dunno current prices. I measured the venturi and it seemed to be 17.96mm from memory, not a 'bored' outlet, but fully. tom
|
|
|
Post by magoconnor on Aug 27, 2018 14:36:47 GMT -5
Thanks Grumpy. They are having a sale on aliexpress right now, so I think I will go ahead and order a few. Just so we are clear the butterfly valve is 20mm right? I dont wanna be stock with more 18mm and 19mm.
|
|
ratdog
Scoot Enthusiast
Posts: 342
|
Post by ratdog on Aug 27, 2018 15:06:47 GMT -5
Just my 2 cents worth... Its a little more on Amazon, but it is prime meaning 2 day shipping plus the big one... you can return it and they wil pay the shipping for the return. that means if it not what you want, it costs you nothing and you have it settled in a couple of days!
|
|