Evo
Scoot Member
Posts: 29
|
Post by Evo on Aug 17, 2011 22:44:00 GMT -5
  Is this fixable and what is the best way to fix it? There are 2 matching scars in the middle of my cylinder hone. |
|
|
|
Post by 190mech on Aug 18, 2011 4:59:25 GMT -5
Looks like it was run with no piston pin clips!It needs a hone job,then It'll run alright.Those slots will not alter the port timing,but it may cause the piston rings to wear quicker..
|
|
bigjeff
Scoot Enthusiast
just scootin
Posts: 294
|
Post by bigjeff on Aug 18, 2011 12:36:20 GMT -5
sweet - After you hone it out (drill motor and hone brush - available at many places - harbor freight has cheap ones) get/beg/borrow/steal a bore micrometer and measure the bore. Then check it against the service limit in a maintence manual and see. Or - - - after the hone and new rings, stick it back together and do a pressure check, OR start it up and see how it runs....
|
|
|
|
Post by jmkjr72 on Aug 18, 2011 19:42:19 GMT -5
if you can feel it with your finger nail proably not
those scores look pretty deep
|
|
|
|
Post by stepthrutuner on Aug 18, 2011 20:05:24 GMT -5
Yeah, It's hard to judge from those pictures.
|
|
Evo
Scoot Member
Posts: 29
|
Post by Evo on Aug 18, 2011 22:59:47 GMT -5
I'll add more pics
|
|
|
|
Post by reveeen on Aug 19, 2011 0:41:02 GMT -5
Is this fixable
How that works here:
No money in bank, big pile of bills on desk waiting payment, no.
Lots of money in bank, pockets brimming with cash, yes.
|
|
