|
|
Post by ThomasTPFL on Feb 20, 2019 10:42:25 GMT -5
Came in a box of parts, not sure which one it is...   |
|
|
|
Post by ThomasTPFL on Feb 20, 2019 10:43:03 GMT -5
|
|
|
|
Post by ThomasTPFL on Feb 20, 2019 10:43:50 GMT -5
And I’ve got this piston, which I have no clue if it goes with the cylinder or not...   |
|
|
|
Post by ryan_ott on Feb 20, 2019 11:01:39 GMT -5
Piston part number shows it’s for street race cylinder for various different models. Is that dirty aluminum or cast? Maybe the MK sport
|
|
|
|
Post by ThomasTPFL on Feb 20, 2019 14:44:44 GMT -5
Piston part number shows it’s for street race cylinder for various different models. Is that dirty aluminum or cast? Maybe the MK sport Dirty aluminum. Street race is their base cast iron kit right? |
|
|
|
Post by ryan_ott on Feb 20, 2019 15:27:22 GMT -5
Street race is their cast kit I don’t think they offer any others. You may be able to use that piston on the aluminum cylinder you just need to watch where the ring ends are, bad things happen when the end in a port. Check the squish and ports at BDC.
|
|
|
|
Post by ThomasTPFL on Feb 20, 2019 20:27:40 GMT -5
I'm gonna have to make a port map proper. The cylinder has me hung up now. It's aluminum but with an open exhaust port. All the Stage6 aluminum cylinders I can find images of are bridged.
|
|
|
|
Post by ryan_ott on Feb 20, 2019 20:33:11 GMT -5
|
|
|
|
Post by ThomasTPFL on Feb 20, 2019 22:38:27 GMT -5
That looks like it. Hmm. I’ll prolly buy a proper piston if I decide to run it on something.
|
|
