Homemade balancer for rear and front wheel

oldgeek
Scoot Master!

Life is lifeless without a 2 stroke

Posts: 6,046

Location: Lost in the tall grass!

Homemade balancer for rear and front wheel Mar 6, 2019 18:09:59 GMT -5 90GTVert, 190mech, and 7 more like this

Quote

Post by oldgeek on Mar 6, 2019 18:09:59 GMT -5

I took a road trip today to see 190mech. While I was there he turned an adaptor on his lathe for me. The adaptor is designed to allow me to use a spare kymco rear axle and a couple bearings to balance Kymco rear wheel and tire combos. The bearings are old Kymco crank bearings that just happen to slip fit the splined area of the axle. The pictures show the setup pretty well, but if you need more details I will be glad to help. A big thanks to 190mech for making it possible!

Last Edit: Mar 22, 2019 21:23:49 GMT -5 by oldgeek

Just Keep Riding! 2T's Forever
Kymco ZX red: 81cc - 50mm bore X 41.4mm Phongeer Tri Port AC
Kymco ZX blue: 73cc - 47.5mm bore X 41.4mm Polini Corsa AC
Kymco ZX naked: 120cc 54mm x 52.4mm Taidia LC (gearbox snapped off of motor) going to build another motor for it sometime
Current long project: Honda Elite/Kymco ZX Naked Custom

ryan_ott Scoot Master! Posts: 5,195	Homemade balancer for rear and front wheel Mar 6, 2019 18:16:28 GMT -5 via mobile 190mech likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Mar 6, 2019 18:16:28 GMT -5 I’m looking for the minarelli version in the drop down menu but it’s not there...
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t

oldgeek Scoot Master! Life is lifeless without a 2 stroke Posts: 6,046 Location: Lost in the tall grass!	Homemade balancer for rear and front wheel Mar 22, 2019 21:23:55 GMT -5 90GTVert, 190mech, and 3 more like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by oldgeek on Mar 22, 2019 21:23:55 GMT -5 I added pictures of the balancer setup I made for the front wheel
	Last Edit: Mar 22, 2019 21:24:11 GMT -5 by oldgeek Just Keep Riding! 2T's Forever Kymco ZX red: 81cc - 50mm bore X 41.4mm Phongeer Tri Port AC Kymco ZX blue: 73cc - 47.5mm bore X 41.4mm Polini Corsa AC Kymco ZX naked: 120cc 54mm x 52.4mm Taidia LC (gearbox snapped off of motor) going to build another motor for it sometime Current long project: Honda Elite/Kymco ZX Naked Custom

Post by oldgeek on Mar 6, 2019 18:09:59 GMT -5

Post by ryan_ott on Mar 6, 2019 18:16:28 GMT -5

Post by oldgeek on Mar 22, 2019 21:23:55 GMT -5

Shoutbox