|
|
Post by mrchilled85 on Dec 14, 2019 17:01:59 GMT -5
hello there i had seen some of 90GTVert youtube videos so wanted to pop over here as im doing a 1e40qmb stroker build my self well just started after late last night my crank bearing failed on me so stripped the full engine down cleaning everything up and starting work on the case's some point next week
|
|
|
|
Post by oldgeek on Dec 14, 2019 19:06:37 GMT -5
 What plans do you have for it?
|
|
|
|
Post by Zino on Dec 14, 2019 20:34:51 GMT -5
Welcome to the forum
|
|
|
|
Post by aeroxbud on Dec 14, 2019 21:41:09 GMT -5
Welcome to the forum.
Start a build thread. Sounds interesting.
We have a few people from the U.K. I am from Portsmouth, down South.
|
|
|
|
Post by mrchilled85 on Dec 15, 2019 2:28:37 GMT -5
 What plans do you have for it? not 100% sure yet as not played around with stroker kits for 9 years since i build my old aerox 100 but now i just need something reliability for summer was thinking 96cc build but ordered a spare new set of engine case's this morning so after they turn up i will start getting other things on order |
|
|
|
Post by mrchilled85 on Dec 15, 2019 2:31:43 GMT -5
Welcome to the forum. Start a build thread. Sounds interesting. We have a few people from the U.K. I am from Portsmouth, down South. as soon as things start turnining up i will as im changing everything on the engine as i would not trust this engine as when i was stripping it down the guy had not used one gasket at all just instant gasket on every thing  |
|
|
|
Post by mrchilled85 on Dec 15, 2019 2:31:59 GMT -5
|
|
|
|
Post by aeroxbud on Dec 15, 2019 4:34:38 GMT -5
Welcome to the forum. Start a build thread. Sounds interesting. We have a few people from the U.K. I am from Portsmouth, down South. as soon as things start turnining up i will as im changing everything on the engine as i would not trust this engine as when i was stripping it down the guy had not used one gasket at all just instant gasket on every thing That's not a good sign. Thankfully these bikes are cheap to fix. |
|
|
|
Post by mrchilled85 on Dec 15, 2019 5:24:57 GMT -5
as soon as things start turnining up i will as im changing everything on the engine as i would not trust this engine as when i was stripping it down the guy had not used one gasket at all just instant gasket on every thing  That's not a good sign. Thankfully these bikes are cheap to fix. yep as soon as i went to change the rollers last week it and the mess of the variator was a sign the engine doomed  one good thing the engine case's i have ordered are for rear disk whats good as dam this rear drum brake  |
|
