I have an old SYM 125cc scooter (air cooled). One of the front suspensions is leaking.
I got a new oil seal with the same measurements, but i need help with how to disassemble the suspension so i can replace the oil seal and put some new oil.
This is a picture of the top of the suspension. There is a black cap on top, which i was able to remove.
This is a picture of how it looks like under the black cap. From what i understand this is a metal cap which i need to push down, and then there supposed to be a clip which i need to remove, so i can take out the metal cap. I actually can't see a clip there, but as you can see there is rust in there.
I tried to push it down, but it's not really moving down, instead the all fork is moving down.
Should i try to spray the rust with some WD-40 and let it penetrate for a while?
Is there a video or a guide on how to rebuild this type of front suspension?
Senna1Rossi: Thanks renagade281!
May 23, 2016 14:59:12 GMT -5
Fox: I don't really know how to say this but straight. I am Dave's Girlfriend Kellilee and bluntly and VERY SADLY he passed away early Tuesday morning. I know he would want ya all to know this. Thank You Brent for befriending my love he was very happy on here!
Jun 18, 2016 16:26:04 GMT -5
Fox: www.gofundme.com/29mgf6b8 I hope it is ok to pass on his gofundme page link. If not you will un-post it I'm sure. Thanks again all!!
Jun 18, 2016 16:31:18 GMT -5