|
|
Post by thunderkat59 on Oct 14, 2011 16:08:01 GMT -5
I have a MC Superstore about 5 minutes from my house so my Leo Vince TT came in one day !
:itshere:
Ok, I read everywhere that Zuma stuff fits Etons. So, I order a Zuma TT pipe, and it definitely doesnt fit. Bracket isnt even close and the headpipe is a little different. Waiting on Leo Vince to write me back and give a part # for the right pipe. this, after the CDI wiring goofed with me this morning and kept the bike from firing . . .
Not a good scooter day. :help:
|
|
|
|
Post by jmkjr72 on Oct 14, 2011 17:53:10 GMT -5
when i put them on etons i had to rework the bracket a oversize the holes and use some spacers
the thing is that even when it comes to yamaha they have 2 diffrent hm 50 cases the itilain one and the tiwain one and then every one else who makes them is going to try and do something just a bit off so they dont have to pay yamaha for the right to use the engine
|
|
|
|
Post by thunderkat59 on Oct 14, 2011 18:08:21 GMT -5
when i put them on etons i had to rework the bracket a oversize the holes and use some spacers the thing is that even when it comes to yamaha they have 2 diffrent hm 50 cases the itilain one and the tiwain one and then every one else who makes them is going to try and do something just a bit off so they dont have to pay yamaha for the right to use the engine :beatup: Thats just what I found on mine, JMKJR--- that bracket was way off but worse was the headppipe. The pipe wasnt flush with the flange. I really did research this stuff before I ordered, but obviously not enough. I guess I'll have to go with a Tecnigas cuz thats the only pipe I can get an actual varification on that it will fit. I chose the TT cuz on a euro scooter site, it made some good HP and had a nice powerband. Oh well . . . . :doh: |
|
|
|
Post by jmkjr72 on Oct 14, 2011 20:13:23 GMT -5
i think it was an eton that i put an sp3 pn 4421 on that is a guti pipe that we run on the zumas
|
|
