ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 13, 2020 19:45:47 GMT -5
Hello everyone. Could anyone please help? I have strange noise coming from engine when i give a throttle. As far as i know the crankshaft is ok cause there's no excessive play
|
|
|
Post by aeroxbud on Nov 13, 2020 19:59:30 GMT -5
Welcome to the forum Can you post a video of the noise?
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 13, 2020 20:16:07 GMT -5
Welcome to the forum Can you post a video of the noise? I'll post a vid tomorrow
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 14, 2020 15:42:16 GMT -5
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 14, 2020 16:44:29 GMT -5
|
|
|
Post by aeroxbud on Nov 14, 2020 18:05:31 GMT -5
it's hard to make out. But from what I can hear it sounds like rattling transmission.
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 14, 2020 18:18:32 GMT -5
it's hard to make out. But from what I can hear it sounds like rattling transmission. What would cause this?
|
|
|
Post by aeroxbud on Nov 14, 2020 18:22:47 GMT -5
Not enough tension in the contra spring. Variator guides worn, worn rollers.
|
|
|
Post by aeroxbud on Nov 14, 2020 18:22:57 GMT -5
Not enough tension in the contra spring. Variator guides worn, worn rollers.
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Nov 26, 2020 14:23:39 GMT -5
Problem was the crankshaft. Halves was moving so i changed it and its all good now.
But its hard to start the moped when it’s cold it had manual choke but i put a bolt inside the hole cuz when i just got the scooter there was just hole any suggestions?
|
|
ryder
Scoot Junior
Posts: 8
|
Post by ryder on Mar 30, 2021 11:03:14 GMT -5
Mop runs great bu i think it heats up really fast. Any suggestions for heat shroud?!?
|
|
|
Post by repherence2 on Mar 30, 2021 16:03:07 GMT -5
No fan shroud huh?
That's a recipe for disaster.
|
|
|
Post by aeroxbud on Mar 30, 2021 18:28:43 GMT -5
|
|