petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Jan 28, 2022 1:44:22 GMT -5
Building a 2021 Razor 150cc
Stock 1P57QMJ engine
NCY Trans kit : 11.5g Roller (3 Ncy roller & 3 Dr pulley 12g sliders)
2k main spring
1500k clutch springs
26mm PWK Nibbi carb
3.5 x 10” stock tires
Naraku Cdi unrestricted - model NK390.22
Stock gears
Pilot jet 42
Main jet 120
Temp in nyc now 19-30s sea level
Top speed unknown but I’m Pushing 65 easy
Bandó belt 743 20 30
K&N 43mm air filter I think it is w/ manual gas valve K&N fuel filter
1/4 ID fuel lines
NCY DIrect coil
NGK iridium 7544
She’s a beast
|
|
|
|
Post by aeroxbud on Jan 28, 2022 6:35:41 GMT -5
Have any pictures, or better still a video?
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Jan 28, 2022 14:16:40 GMT -5
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Jan 28, 2022 14:41:11 GMT -5
|
|
|
|
Post by 90GTVert on Jan 28, 2022 16:56:56 GMT -5
Welcome to the forum!
Since it's labeled as a drag build; have you done any timed runs? 0-??, 1/8 mile, etc..?
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Jan 28, 2022 17:34:12 GMT -5
Thanks man
Not yet I will time myself when the weather clears here is currently snowing
I’ll upload a video
Polishing the head in a few days and installing open headers once it arrives
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Feb 8, 2022 23:15:48 GMT -5
So I added some new mods to the bike today :
Open headers
Ported and polished cylinder head
Titanium ncy valves
Titanium Ncy valve springs
Titanium valve retainers
15*37 gears
Naraku unrestricted CDI
Mannn she roars and is a fuckinh fast !!!
1/8 mile pushed to 75MPH & still had some juice in her with the stick motor & stock piston
My goal is to street race on pretty much stock bore and see how much I can push her
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Feb 8, 2022 23:18:52 GMT -5
|
|
|
|
Post by fugaziiv on Feb 9, 2022 14:36:24 GMT -5
I remember building drag bikes. Those were the days.
Matt
|
|
|
|
Post by aeroxbud on Feb 9, 2022 15:45:58 GMT -5
Wow that sounds loud!
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Feb 13, 2022 12:27:13 GMT -5
Update: 1/8 mile - 0-60 3.6secs 1/4 mile - top speed 84mph !! FYI NO BIG BORE KIT!! Drag raced 2 dodge hell cats this weekend and smoked them on the 1/8 mile race Here’s an update on my ported and polished stock 1p57QMJ cylinder head youtube.com/shorts/cJMFyKeoiSs?feature=share |
|
|
|
Post by Lucass2T on Feb 14, 2022 1:29:05 GMT -5
What a beast
|
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Feb 20, 2022 13:04:23 GMT -5
|
|
|
|
Post by aeroxbud on Feb 20, 2022 13:10:32 GMT -5
That is crazy loud!  |
|
petey06
Scoot Junior
https://youtu.be/Sbug7QYsvzo Cruising through NYC
Posts: 18
|
Post by petey06 on Feb 27, 2022 18:04:50 GMT -5
UPDATE: RPM Gauge installed Removed the rear swing arm Added the short axle and removed one rear shock Also Did new Fab work for the Carb Just last night i pushed 90mph on the stock bore & motor with new internals including the ported & polished head. THIS BABY is officially getting New wide rims next week & Slicks for street racing Forgot to mention Also Converting to Methanol !!      |
|
