Post by slipperyscooter on Jun 24, 2023 9:36:08 GMT -5
I'm trying to wire up my vino 125 scooter stator into a basic gy6 Chinese wiring harness, my stator has two plugs a 4 pin one containing a white/red wire, white/blue wire, black/red wire and white green wire. The other plug is two pin containing yellow/red wire and a white wire. So six wires in total (picture above)
Now the Chinese gy6 harness has 5 wires on the stator plug, one plug containing 3 wires white, yellow and green. It has two single wires one red/black and one is blue.
Now this guy on my Facebook vino group got the vino125 to run off a Chinese gy6 CDI so Im trying to run a complete wiring harness
