|
|
Post by helspawn70 on Jul 13, 2023 20:57:01 GMT -5
Hi all, need help. I'm going to be replacing the head gasket on my smax. I've been looking high and low for the torque specs to torque down the nuts on the cylinder.
Thanks in advance
|
|
|
|
Post by 90GTVert on Jul 14, 2023 8:05:02 GMT -5
Welcome to the forum!
I tried some brief searches. Can't seem to find anything but the owner's manual online. You can buy the paper service manual for around $80 that should have all specifications. There's one on eBay for $35 ATM. I'd go that route.
Another option would be to see if you get lucky with a dealer if no one online shares the answer. Some parts/service folks are very cool and willing to help if they can, others may tell you to bring it in for service or buy a manual.
You can look up specs by fastener size, but those won't always match what Yamaha wants you to torque to so I'd keep that as a last resort.
|
|
|
|
Post by helspawn70 on Jul 26, 2023 19:45:28 GMT -5
Thanks so much 90GTVert. I bought the manual off of ebay and it had ALL the specs for the whole bike. 👍🏼👍🏼👍🏼
|
|
|
|
Post by 90GTVert on Jul 27, 2023 4:57:20 GMT -5
I don't think you'll regret owning it, especially at that price. They come in handy for so much stuff.
|
|
