Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 27, 2011 16:24:08 GMT -5
does anyone know where to get a metal intake spacer for the 150s? i have a problem child here the stock plastic intake spacers keep cracking. I found ones for the 50 but not for the 150.
thanks friends.
|
|
slawenm
Scoot Enthusiast
Posts: 171
|
Post by slawenm on Dec 27, 2011 17:13:18 GMT -5
Hmm I wouldnt mind a metal 50cc intake spacer I've cracked 2 so far have JB welded my last one back together because no post over x-mass
any chance of a link to the thing?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 27, 2011 17:38:54 GMT -5
|
|
slawenm
Scoot Enthusiast
Posts: 171
|
Post by slawenm on Dec 27, 2011 17:45:26 GMT -5
ahh many thanks seen one of them many moons ago but never remembered where Naraku are a great parts company too.
says need a larger head but my ports are standard size wonder if it will work out for me.
|
|
|
|
Post by bigkahuna427 on Dec 27, 2011 18:48:27 GMT -5
That part is more than likely an isolator. It isolates heat from the head.
|
|
|
|
Post by Enviromoto on Dec 27, 2011 21:58:29 GMT -5
I use them on the 150's just gotta do a little port matching.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 27, 2011 21:59:32 GMT -5
That part is more than likely an isolator. It isolates heat from the head. regardless of its official name...i need a metal one that will not crack  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 27, 2011 22:03:13 GMT -5
I use them on the 150's just gotta do a little port matching. I didnt realize the stud spacing was the same excellent thanks. |
|
