chi
Scoot Junior
Posts: 13
|
Post by chi on Dec 19, 2023 17:33:27 GMT -5
It's a different gasket to the one that came with your cylinder. It's thicker. If disconnected electric choke and temperature sensor, I don’t need to put factory cylinder, so which one do you think better ?? Factory or Malossie cylinder head |
|
|
|
Post by aeroxbud on Dec 20, 2023 6:01:14 GMT -5
If you disconnected the temperature sensor. You will almost certainly seize your engine. The Euro 4 is very different to the previous model. That's why you have to use the standard cylinder.
The CDI has to know the temperature to set the ignition timing.
The choke needs power to it to turn it off. If it's disconnected, it will never run right.
Piaggio did a lot of modifications to the Euro 4 models to get through emissions. Even though it looks the same as the previous model, it's not.
|
|
chi
Scoot Junior
Posts: 13
|
Post by chi on Dec 20, 2023 22:44:10 GMT -5
If you disconnected the temperature sensor. You will almost certainly seize your engine. The Euro 4 is very different to the previous model. That's why you have to use the standard cylinder. The CDI has to know the temperature to set the ignition timing. The choke needs power to it to turn it off. If it's disconnected, it will never run right. Piaggio did a lot of modifications to the Euro 4 models to get through emissions. Even though it looks the same as the previous model, it's not. Thanks. I just connected the temperature sensor and disconnected E-choke then I did test drive. It was fine but sometimes rpm didn’t come back to stable rpm ( 1500-1700) it was around 2000 but sometimes back to normal rpm. Driving was not bad but feel like lose a bit power. Top speed was 75 , it’s 70 now and a bit slow to reach top speed as well but good news is didn’t cut engine out this time. |
|
|
|
Post by aeroxbud on Dec 21, 2023 6:32:17 GMT -5
The idle is erratic because even with the bike warm. It's running on the choke.
|
|
chi
Scoot Junior
Posts: 13
|
Post by chi on Dec 22, 2023 16:42:44 GMT -5
The idle is erratic because even with the bike warm. It's running on the choke. Thanks a lot bro. My scooter is good but I think, not 100% but I try driving from today. Still rpm is around 2-3000 but I think, it will be fine to drive. I’m very scared to break down again on the road lol because it’s my first scooter ever. Thanks again. I will be back if I need help. Merry Christmas |
|
chi
Scoot Junior
Posts: 13
|
Post by chi on Dec 23, 2023 22:05:17 GMT -5
The idle is erratic because even with the bike warm. It's running on the choke. Hi mate. My scooter has died when I stop and can not electric stator only kick work but when cool down I can start with electric startor. I don’t know why .. |
|
|
|
Post by aeroxbud on Dec 24, 2023 5:13:53 GMT -5
Does it turn over freely when you kick it?
|
|
chi
Scoot Junior
Posts: 13
|
Post by chi on Dec 25, 2023 6:32:57 GMT -5
Does it turn over freely when you kick it? Yes it was easy with kick starter. Do you think to put smaller MJ?? It’s 90now with 20.2 carby. |
|
|
|
Post by aeroxbud on Dec 25, 2023 9:04:18 GMT -5
I think you really need to get a temperature gauge. It would give you an idea of what's going on.
|
|
