|
|
Post by helpme22 on Jan 24, 2024 16:35:53 GMT -5
OK so I got a new wire harness and I put it on my moped. I got it going it started I had to make the wire longer so it says what harness can reach my front and so I had to cut in spots wires when I did and now I try to start it back and it won’t start for nothing, just roll over and over and over. Please help.
|
|
|
|
Post by FrankenMech on Jan 25, 2024 0:12:18 GMT -5
You screwed up the extension, just check your work AGAIN.
|
|
|
|
Post by gapplebees203 on Feb 1, 2024 17:17:54 GMT -5
I agree with FrankenMech, double check your work on the extention. If you used wire butt-end connectors make sure they are tight by giving each end of the wire a lil tug, also make sure the wires are fully inserted. And not to over crimp them, i have had a few situations where i accidently cut the wire on the inside when i crimped them. Good luck
|
|
