|
|
Post by ziptiejones on Mar 12, 2024 9:47:48 GMT -5
 I was working on installing a different reed cage but it didn't fit. After I reassembled everything I noticed I forgot this piece. How bad is it if I ride to work and back today? I'm off tomorrow so I can put it back in then. |
|
|
|
Post by oldgeek on Mar 12, 2024 10:12:57 GMT -5
I was working on installing a different reed cage but it didn't fit. After I reassembled everything I noticed I forgot this piece. How bad is it if I ride to work and back today? I'm off tomorrow so I can put it back in then. You are absolutely fine without it. |
|
|
|
Post by ziptiejones on Mar 12, 2024 10:39:45 GMT -5
You are absolutely fine without it. Thank you! |
|
|
|
Post by oldgeek on Mar 12, 2024 10:48:33 GMT -5
As you found out, the standard horizontal minarelli reed cages do not fit the VINO. The Vino reed cage is unique to the Vino and old Jog's I believe. There are some aftermarket cages for the Vino but they are hard to find. Only one I ever saw was on Webbike Japan Vino reed cage I think that one will fit the Vino Inspect the metal reeds good next time you take it apart. I had a chip on one of mine. |
|
|
|
Post by ziptiejones on Mar 12, 2024 14:33:34 GMT -5
The stock reeds looked to be in pretty good shape. I tried replacing them with one of the sets that came with either the cage or my cylinder kit but none of them fit lol.
I went and checked that link out. I'm ordering one lol
|
|
|
|
Post by monsterunderyourbed on Mar 23, 2024 0:54:21 GMT -5
Run it without it is fine, Vino's have a funny swept forward reed Cage that uses 2 different size reeds which is an interesting design that i thought may have some pros/cons. You can buy Reed material and replicate the reeds
|
|
