|
|
Post by scooterbob on Mar 18, 2024 3:30:13 GMT -5
Is the stage6 oversize any good? Or just stick with the malossi overrange?
|
|
|
|
Post by 90GTVert on Mar 19, 2024 6:24:18 GMT -5
I had a fixed half pulley from a Stage6 over range variator and it had about a 12.5 degree angle, compared to around 14 degrees for the Malossi or Polini standard over range (Polini does make a 12.5 version said to be for very powerful applications). I have only mixed a 12.5 front pulley with 14 degree rear pulley, but acceleration was better for me with the RC-One with 14 degree stuff and the RC-One is a pretty powerful engine.
Currently using the Polini Hi-Speed variator paired with Malossi rear pulley. Works great. Malossi's whole OR kit works very well, but I got a small improvement when switching to the Hi-Speed. No idea how Polini's whole kit is.
|
|
|
|
Post by scooterbob on Mar 19, 2024 23:42:10 GMT -5
my rc one has a problem. it will start but when i turn off choke it dies i think it just needs a carb clean, and if you give any gas it bogs.
|
|
