|
|
Post by snakehole on Sept 4, 2024 14:09:11 GMT -5
I've got a 2022 Vitacci challenger that i got at the beginning of the year. no real issues but i had the CVT belt snap on me the other day and it has no markings on it for the right size. I contacted the USA dealer and they offered to sell me one but not tell me the size. Im obviously hesitant to get there due to the fact mine snapped at under 1500 miles. I cant seem to find the right size and FAQ here doesnt work for me for reason. Its an 11 bolt case and 18mm belts are too wide. The 788-17-28 seems a touch too long because it works fine on the jackstand but as soon as weight is on the seat, it bogs down and cant accelerate. Any help would be greatly appreciated.
|
|
|
|
Post by FrankenMech on Sept 4, 2024 23:56:34 GMT -5
Buy the factory belt and measure it. Then buy a good quality brand belt and compare it to the factory belt. Once you find the size engrave the size on the inside of the CVT cover.
|
|
|
|
Post by snakehole on Sept 8, 2024 6:05:19 GMT -5
I didnt want to have to cave to them, but thank you for the advice. didnt even think about engraving it on the cover
|
|
|
|
Post by aeroxbud on Sept 8, 2024 8:54:14 GMT -5
|
|
|
|
Post by snakehole on Sept 10, 2024 14:50:19 GMT -5
I did buy an 18mm belt and it was definitely too wide, it didn't rest where it needed to and the 17mm belt I bought sat
in the correct position but i think you solved it with the link. For some dumb reason it was beyond me to actually think to measure the width of the broken belt. The 723-17.5-28 looks like the one
|
|
