Vento Triton R4 - 2005 - Ignition Switch

[alivento]

I received this barely new 2005 Vento Triton R4 a few weeks ago and the owner said he lost the keys.

He had it in his shed for over 15 years. It had 300 miles on it.


So I ordered a switch for it. The new switch has 4 wires while the original has 5.



I cut the wires of the old ignition to connect them to the new switch before I  realized the new has 4 wires.

Now what to do?

I was able to rewove the back of the old switch with 5 wire points and attach it to the new switch key part.

The 5 wires i have are:

1- Red
2- Black
3- Green
4- Black and White stripe.
5 Red and White stripe.


I have 5 spot but I do not know where all the wires exactly go.  I need help and I came here after I spent many hours looking for an answer to no avail.

If anyone here has the same moped they can help me by taking a photo of the switch back with wires exposed.


I used a multimeter to test for continuity and figured red and black although I had them switched but i just removed the pins in the connector and swiped them instead of soldering them again.




My problem is the Red/White wire. where does it go and what does it do.

The lights, signals lights and horn all have stopped working after I changed the switch. 

Before this I jimmied the original lock and the lights and horn worked with the battery or when the moped was running. 


This is my 1st post so thanks for help

[FrankenMech]

Welcome to 49ccScoot. Please ask technical questions like this in the chassis section below. This is the lobby area for introductions and help with forum operations, rules and regulations. Look on down the list of forum sections below.