will peugeot speedfight 1/2 cylinder fit my honda dio

[hondadioaf28]

guys i have  honda dio af18e engine i cant find good kits, i saw somewhere that speedfight cylinder fits but i dont know so thats why am asking i hope someone will answer

[oldgeek]

I am not sure, you could probably get it to work depending how much work you are willing to put into it. Dio stock stroke = 41.4 Speedfight 1 = 39.1 Speedfight 2 = 39.5 according to wikipedia. You would also have to do something to the exhaust as the outlets are different.

I have one of these kits, have not installed it but it looks pretty good. This kit will require a 44mm stroke crank to set up properly.
www.treatland.tv/athena-honda-DIO-70cc-47-6mm-cylinder-kit-p/athena-070400.htm

[aeroxbud]

To be honest. There isn't that much tuning stuff available for the speedy now. Probably about the same as you can find for the early dio.
So you are not likely to gain much from fitting a Peugeot cylinder.

[hondadioaf28]

tbh ur right i might go with the malossi 70cc sport kit, my honda dio is alr making 6.8hp stock 5kw in documents and with some parts like sport variator malossi belt and other things i did maybe 80 90 kmh and with the malossi kit i dont think i will get it over 100kmh so idk

[hondadioaf28]

Nov 17, 2024 17:50:01 GMT -5 oldgeek said:

I am not sure, you could probably get it to work depending how much work you are willing to put into it. Dio stock stroke = 41.4 Speedfight 1 = 39.1 Speedfight 2 = 39.5 according to wikipedia. You would also have to do something to the exhaust as the outlets are different.

I have one of these kits, have not installed it but it looks pretty good. This kit will require a 44mm stroke crank to set up properly.
www.treatland.tv/athena-honda-DIO-70cc-47-6mm-cylinder-kit-p/athena-070400.htm

[hondadioaf28]

so i need to put spacers on, i would re weld exhaust btw athena kit is good but currently i dont have the money for other cranks and things so