|
|
Post by buddyearl on Apr 19, 2012 13:40:58 GMT -5
Have an electrical issue on a new Puma Cycle that I've not experienced before. Start it up and after running for about 20 seconds all the lights start to flicker and when I pull either brake handle the all the lights dim. I have replaced the stator, regulator, cdi, coil, battery, fuse, all the bulbs and still does it. Has anyone had this happen and how did you resolve the issue?
Thanks
|
|
|
|
Post by dirtymoosetaint on Apr 19, 2012 14:06:47 GMT -5
check all your wires might be a short somewhere..
|
|
|
|
Post by felliott on Apr 19, 2012 17:50:49 GMT -5
Sounds like you have a bad ground.
|
|
|
|
Post by 90GTVert on Apr 19, 2012 18:24:32 GMT -5
Check all grounds to the engine, frame, and battery.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2012 20:05:04 GMT -5
yeah sounds like a ground issue to me also
|
|
inuyasha
Scoot Enthusiast
Retired Master Chief USN
Posts: 471
|
Post by inuyasha on Apr 21, 2012 20:19:03 GMT -5
Hi Pleased to meet you I agree as well most likely a bad ground What Puma do you havebtw? i had an Angel until some one lifted her when i ran into the store and neglected to use my locks She was quite a fine scoot fit and finish wise and performed very well  puma by inuyasha50, on Flickr  Bike And BIKE Damage 007 by inuyasha50, on Flickr Puma's are quite a wonderful scoot. my only wish is that they would make a 2t model Take care and ride safely Yours Hank |
|
