|
|
Post by peteyparado on Apr 30, 2012 6:08:49 GMT -5
got a 82cc bbk what are good up gear for this size of a motor? there are more flats roads here.not to many hills i looking for more speed,not to much of an up gear change were the motor cant get to speed(rpms) my stock gears are 15/51 or 3.4 is 17/49 or 2.88 good. what about 17/41 2.41 or is that to tall for this 82cc motor.what gears do you guys use with your bbk's
|
|
|
|
Post by seaquell on May 3, 2012 13:41:22 GMT -5
Hi, I just put in my 52mm BBK I think its a 82cc also I am looking for a up gear kit I have lots more torque over stock but only a little more top end. I think a up gear set is the way to go. Any ideas where I can buy the set? What rollers and clutch springs are you guys using? How do you best break in a new piston and bore set?
Thanks,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2012 14:12:18 GMT -5
Hi, I just put in my 52mm BBK I think its a 82cc also I am looking for a up gear kit I have lots more torque over stock but only a little more top end. I think a up gear set is the way to go. Any ideas where I can buy the set? What rollers and clutch springs are you guys using? How do you best break in a new piston and bore set? Thanks, 52.4mm bore x41.4 stroke= 89.28cc...might as well call it 90. gear sets: www.partsforscooters.com/169-206_QMB139_Gear_Set?sc=11&category=73517 41 is what i hear most use with good results. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 5, 2012 2:26:01 GMT -5
|
|
|
|
Post by peteyparado on May 5, 2012 5:38:41 GMT -5
thanks. but i tested this exact gear set from a friend b4 i was going to buy it an it was a closer set then my stock gears i lost about 6mph, gain bottom end torque.. i think i mite try the HOCA 16/42?  ?? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 5, 2012 23:57:03 GMT -5
I dont know exactly. Here in central NC i do have some hills to deal with so i run stock gears.
|
|
