tango
Scoot Enthusiast
Ad agendum semper parati
Posts: 389
|
Post by tango on May 20, 2012 10:17:02 GMT -5
Finally! I was being a total air-head. I completely forgot that my laptop has an SD card reader and all I had to do was pop the card in and transfer the files. VOILA! Problem solved. Anyway, without further adieu... Pics:  At Boca Scooters in Boca Raton, FL picking up the scoot.  On the road taking the scoot home.     Video: Thanks again guys! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2012 10:21:09 GMT -5
it doesnt have rear disc brake so I am shocked lol
|
|
|
|
Post by 90GTVert on May 20, 2012 10:39:37 GMT -5
What, no burnouts?!?!  Haha J/K Save those tires and keep that good looking scoot clean. :thumb: Thanks for the thorough vid and shoutouts. Don't wear that starter out. |
|
tango
Scoot Enthusiast
Ad agendum semper parati
Posts: 389
|
Post by tango on May 20, 2012 14:02:11 GMT -5
@ QMB: LMAO! I know, I know, I know...I came close...really close to getting a 2T with rear disc but the bitch that was selling them was trying to hold a hard end on me, so I showed her who is boss. She can go kiss my ass. This scoot really has been a last resort purchase but in the end I think I came away with a good deal.
@ Vert: (I'm REALLY trying my best not to goof around and call you "Bert" LMAO) Can you believe it? No burnouts...I think I'd need a 2T for that...what do you say? LOL!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2012 14:09:50 GMT -5
I would love to know what the distance is from the inside of one fork to the other...
|
|
inuyasha
Scoot Enthusiast
Retired Master Chief USN
Posts: 471
|
Post by inuyasha on May 20, 2012 14:11:20 GMT -5
Hi
Outstanding
Very nice, shes quite a gorgeous scoot
Thanks ever so much for the photos and video
Take care and ride safely dear friend
Yours Hank
|
|
|
|
Post by 90GTVert on May 20, 2012 18:34:02 GMT -5
I'm REALLY trying my best not to goof around and call you "Bert" LMAO Oh no. :beatup: lol |
|
tango
Scoot Enthusiast
Ad agendum semper parati
Posts: 389
|
Post by tango on May 20, 2012 19:46:37 GMT -5
I would love to know what the distance is from the inside of one fork to the other... It's kinda dark outside and I was using one of those floppy inch-measures (ie, no accuracy whatsoever) but I am seeing about 5 1/2 inches at the rotor, 5 15/16 under the neck. Thinking about doing a tyre/wheel swap? |
|
|
|
Post by maconboi on May 21, 2012 17:39:52 GMT -5
hum lots of changes in styling from 2011 to the 2012
|
|
tango
Scoot Enthusiast
Ad agendum semper parati
Posts: 389
|
Post by tango on May 22, 2012 18:39:44 GMT -5
Hey brother! Yeah...it's a stunning difference. Though, I think the older design is still available.
A quick question. Your rollers are 7g. What did it come with stock? I'm thinking that I want to do some vari work when I get back to FL next. Mine will bury the speedo needle quite easily, but I would love a bit more speed and a bit more urgency getting there. A hard nut to crack, I'm sure, but I was thinking a slightly lighter weight would do...I say "weight" because I'm thinking of going with sliders. I'm also thinking of going with a larger carb too...The only thing I want to leave alone is the clutch. Don't want to go digging around back there at all.
|
|
