|
Post by need4speed on May 22, 2012 11:48:28 GMT -5
I installed a new 72cc BBK and everything was running great, averaged around 45 mph, recently I got some bad gas and it ran like crap, and I drained all that out, put in fresh premium gas but now I have no power at all. It fires up and runs good, but no power. I checked the valves, checked the rollers to make sure still in place, cleaned the spark plug, where do I go now?
|
|
|
Post by 90GTVert on May 22, 2012 12:25:56 GMT -5
Wait... you checked the valves? The reed valves or is this a four stroke?
Did you clean the carb? Check the fuel filter?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2012 12:26:51 GMT -5
its a 4t he posted in the wrong section
|
|