|
|
Post by lasengo on Aug 17, 2010 7:40:16 GMT -5
Ok, I'll take some pictures of the engine. What kind of pictures do you guys want me to take?
|
|
|
|
Post by 2strokd on Aug 17, 2010 11:02:40 GMT -5
Both sides of the whole engine would be best.
Then any close-ups of the carb, exhaust, cvt cover, etc,
the more the better!
|
|
|
|
Post by lasengo on Aug 17, 2010 16:41:43 GMT -5
Ok, I'll see what I can do this weekend.
|
|
|
|
Post by lasengo on Aug 19, 2010 4:58:24 GMT -5
|
|
|
|
Post by 2strokd on Aug 19, 2010 8:27:38 GMT -5
:stumped: You got me here. Im not quite sure what engine that is? It looks kinda like a Morini to me.?. Im not sure, i havent seen one quite like that yet... I will do my best to help ya figure it out though  . Hey! At least it runs good right? ;D |
|
|
|
Post by lasengo on Aug 19, 2010 9:45:40 GMT -5
Yea, it runs pretty well for me. Gets me around fine.  I will try to get some pictures of the engine with the cover off. Thanks for all your help 2strokd! Oh and I read somewhere that Daelim makes their own engines. I just don't know what it might be a copy of, if it is at all. Lol. I know I can get at least a pipe, jets, rollers and clutch springs for it. |
|
|
|
Post by 2strokd on Aug 19, 2010 11:02:17 GMT -5
It looks like a Morini but the intake looks like a Kymco....
I dunno lol. Like you said, at least it is running good!
|
|
|
|
Post by stepthrutuner on Aug 19, 2010 11:39:59 GMT -5
I think the engines are supplied by Kymco and are a derivation of the 1E Honda (Elite 50) engine.
I don't put much stock in these guy's tutorials or product endorsements (very unprofessional) but they claim to be parts suppliers here in the U.S. Just find an MRP dealer that you can rely on.
|
|
jimh
Scoot Enthusiast
Posts: 198
|
Post by jimh on Aug 19, 2010 19:40:43 GMT -5
Hmmm, intake isn't like my Morini at all; I'm stumped but that's no surprise!
|
|
|
|
Post by lasengo on Aug 20, 2010 3:58:19 GMT -5
So I was looking at pictures of Kymco scooters and the engines look a lot a like. At least from outward appearances. I took some more pictures of the block, the best I could at least, I'm just waiting for imageshack to come back up to throw them up here.
|
|
|
|
Post by lasengo on Aug 20, 2010 5:10:14 GMT -5
|
|
|
|
Post by 190mech on Aug 20, 2010 9:17:58 GMT -5
Yea,it kinda looks like a Kymco,but a bunch looks like a 'one off' design..Looks well built,may have some problems with performance parts availability though..
|
|
|
|
Post by 2strokd on Aug 20, 2010 10:25:28 GMT -5
Hmmm, intake isn't like my Morini at all; I'm stumped but that's no surprise! I said, "the intake looks like a Kymco,s" Im still not 100% either way though  |
|
|
|
Post by lasengo on Aug 20, 2010 10:41:57 GMT -5
|
|
|
|
Post by lasengo on Aug 21, 2010 6:41:16 GMT -5
I don't know if any of you guys have seen this or not. scootdawg.proboards.com/index.cgi?board=2stroke&action=display&thread=28066I also noticed that when I look for parts a lot of the sites like Sip list Honda Dio ZX and Kymco Sniper parts when I pick Daelim S-Five. Which goes along with a lot of the other things I've read on the internet that Daelim uses some Honda and Kymco derived parts. I just want to be able to change out the variator, clutch, exhaust, belt and jets. |
|
.
