Post by mattsqz on Jun 2, 2014 19:24:58 GMT -5
This thread will likely be edited later with more detail, for now here are the pics!
as it appeared when i acquired it from the previous owner:
teardown begins:
byebye, metallic purple and silver!
beginning basic reassembly - electrical, fuel, etc
now, onto the mechanicals..this thing had burnt valves, rings, the whole top end was trash.
goodbye, useless garbage!
lets get this party started
39mm vs 50mm
new head
dark outside, but all back together
the next day..
today:
so, whaddaya think? i recently made a 3/64th base gasket and put it on, as it was very hard to start with compression as high as it was.
as it appeared when i acquired it from the previous owner:
teardown begins:
byebye, metallic purple and silver!
beginning basic reassembly - electrical, fuel, etc
now, onto the mechanicals..this thing had burnt valves, rings, the whole top end was trash.
goodbye, useless garbage!
lets get this party started
39mm vs 50mm
new head
dark outside, but all back together
the next day..
today:
so, whaddaya think? i recently made a 3/64th base gasket and put it on, as it was very hard to start with compression as high as it was.
