Post by warriorboxerdog on Jun 24, 2014 12:37:53 GMT -5
I'm working on building a e-ton beamer 2. Its a 2005. So far I have installed a tecnigas pipe, malossi read block and reeds and rejetted to a 90. This scooter has about 4500 miles and runs like a champ. I can max out the speedo on flat roads. I have also replaced the belt, the vacuum fuel pump, headlight controller and replaced all the fluids. It needs the transmission redone bad. the variator and drive face pulley have groves worn in them and the clutch is worn and making noise. Does anyone know if the nyc trans kit for the zumma will fit the E-ton beamer II? Oh for future reference I used a reed block and reeds for the Yamaha jog. I believe it was the vr14 carbon fiber racing set. reeds and block together were 100.00