Ram Air for my cvt case

[shakerdriver]

well i was inspired by 90GTverts "homemade air scoop" (which i'm trying next) to make a scoop for my cvt case since its not factory vented. i started with a 3" funnel i found laying around my garage.

made a few marks where to cut and started cutting and test fitting



molding and sanding, molding alittle more and sanding ALOT.



then finish sand it and prep it for and actually paint it.




i still need to plumb the piping and move the airbox but i think it'll look and perform alright.

[90GTVert]

Excellent idea, and I like the execution as well! I'll be adding this one to our Tech Library for sure. Thanks for the pics and info. ;D

[shakerdriver]

well i just looked at the post again and discovered that i posted duplicates of some of them and still have a little work to do when posting pics. thanks for the feed back brent.

[Fox]

Great post shakerdriver!

[2strokd]

:thumb: Great work shaka!
When we talked i was speaking of another build by Mexicano at Scooterinvasion with the ram-air to the CVT. Here is his Triton build thread www.scooterinvasion.net/forum/viewtopic.php?t=8

He has built a Triton for his son with detailed pics of the set-up he built but i cant find it now .

Yours look really good!!! :cheers:

[2strokd]

Here it is
www.scooterinvasion.net/forum/viewtopic.php?t=2087

[shakerdriver]

Well I got the plumbing done for my ram air, moved the air box forward about an inch to make room for the fitting in the case and the case SEEMS cooler to the touch so I'm pretty happy with the final results.

[shakerdriver]

Also got the boppers installed that I bought from 2strokd and went for a quick ride , no more vibration like I had with the stock knobby tires. ;D Thanks for hooking me up Robert! Now just gotta get the bbk bought. & put on and I'll be :scoot2: 'n in style.