|
|
Post by birdman on Aug 17, 2014 18:03:47 GMT -5
I am having the time of my life locating a magneto gasket for 1990 Jog CG50. I was wondering if this gasket is even necesary, or if I could get by with using silicone sealant or something like that...
Thanks in advance for all the replies
|
|
|
|
Post by 90GTVert on Aug 18, 2014 7:56:14 GMT -5
|
|
|
|
Post by birdman on Aug 18, 2014 12:29:41 GMT -5
Those are gaskets for the horizontal minarelli. I need the one for a vertical minarelli. The horizontal stuff is always easy to find. The thing is I have switched to premix, but there is still grease packed in there. When I switched from injection to premix all I did was remove the resevoir and lines and cap off the ports on the oil pump. So now that Im running premix, I dont need the gasket?
|
|
|
|
Post by shakerdriver on Aug 18, 2014 17:53:58 GMT -5
I wouldn't worry about the gasket if you've switched to premix, maybe spend a little time cleaning some of the grease out of there or it may start splattering all over magneto and flywheel.
|
|
|
|
Post by birdman on Aug 19, 2014 1:50:04 GMT -5
Sweet! I was looking (thoroughly lol) and I see that the oil pump cavity doesnt protrude into the crank case. So, yea, I will clean the grease up and leave the oil pump out and cover the hole...Sweet!! Thanks!! 49ccscoot save my @$$ again!!
|
|
