|
|
Post by renagade281 on May 15, 2016 16:16:59 GMT -5
|
|
|
|
Post by jkeney on May 15, 2016 16:31:39 GMT -5
It looks like you attached the top mounting point on wrong. Just a guess.
|
|
|
|
Post by renagade281 on May 15, 2016 16:49:55 GMT -5
It looks like you attached the top mounting point on wrong. Just a guess. I thought it only went on one way. Gnna have another look |
|
|
|
Post by jkeney on May 15, 2016 16:57:56 GMT -5
To me it looks like it was bolted to the inside of its intended bracket.
|
|
|
|
Post by jkeney on May 15, 2016 16:58:41 GMT -5
The pic with the longer and short strut show no difference in offset or anything other than length as far as I can tell.
|
|
|
|
Post by jkeney on May 15, 2016 17:05:16 GMT -5
Did you swap 12s in place of 10s?
|
|
|
|
Post by aeroxbud on May 15, 2016 17:24:21 GMT -5
Are the 12" wheels wider or have a different offset?
|
|
|
|
Post by spaz12 on May 15, 2016 17:33:44 GMT -5
|
|
|
|
Post by 90GTVert on May 15, 2016 18:00:15 GMT -5
I did something sort of like that on my old SunL to fit a 120/90-10, but I chopped the bottom of the shock off and welded it on offset in addition to the new top mount.  |
|
|
|
Post by renagade281 on May 15, 2016 18:11:02 GMT -5
 Fixed. Yes the 12 inch tires are wider. But it's solved now and drives so nice. I love the finAL look of it  |
|
|
|
Post by spaz12 on May 15, 2016 18:14:34 GMT -5
There's a good chance of you busting that mount off the motor. You are putting stresses on it that it was never designed for. I would not risk that for anything.
If you need to do it like that, then do it like Ryan did.
|
|
|
|
Post by renagade281 on May 15, 2016 18:16:51 GMT -5
The speedo cables were different so I just eliminated that from the front since they aren't correct anyways. One day I will get a digital trail tech or something cheaper. Anyone got any links to a cheapo speedo
|
|
|
|
Post by renagade281 on May 15, 2016 18:25:15 GMT -5
There's a good chance of you busting that mount off the motor. You are putting stresses on it that it was never designed for. I would not risk that for anything. If you need to do it like that, then do it like Ryan did. I'm bout to do something. I agree now that u said that |
|
|
|
Post by spaz12 on May 15, 2016 18:30:12 GMT -5
You might have to modify your cvt cover a bit (notch it out) to fit over that plate, but I don't think there'll be a problem?
|
|
|
|
Post by renagade281 on May 15, 2016 19:19:13 GMT -5
You might have to modify your cvt cover a bit (notch it out) to fit over that plate, but I don't think there'll be a problem? Yea that's the plan. I'll post pics of the finished product... Should be done here in a few mins... Taking a smoke break now lol |
|
.png){kind=logo}
