|
Post by benji on Apr 13, 2019 19:23:25 GMT -5
Look what I just picked up! Here's pics of it now, just fixed the front wheel and put drag bars on it. Pulled the windshield and cupholder for now.
|
|
|
Benji's C3
Apr 13, 2019 19:27:12 GMT -5
via mobile
Post by benji on Apr 13, 2019 19:27:12 GMT -5
The front fork looks bent to me. I'm going to take it apart and do some measuring.
|
|
|
Post by Happypancake! on Apr 13, 2019 19:31:49 GMT -5
Oh yeah!!!!!!!!!!!
|
|
|
Benji's C3
Apr 13, 2019 19:32:09 GMT -5
via mobile
Post by ryan_ott on Apr 13, 2019 19:32:09 GMT -5
What are your plans for it?
|
|
|
Post by aeroxbud on Apr 13, 2019 19:32:12 GMT -5
And so the Modifying begins 😁
|
|
|
Benji's C3
Apr 13, 2019 19:43:35 GMT -5
via mobile
Post by benji on Apr 13, 2019 19:43:35 GMT -5
What are your plans for it? get it to 45-50, then ride it till it dies. I need a commuter cuz my Honda Accord is dying, and I can't afford a new car right now. But, a $300 scooter is right in the budget haha. I was either gonna push the car another couple weeks and get a zuma 125 or street bike, but she's been running real tough today so I pulled the trigger. Hopefully this c3 doesn't get me run over haha. All the roads around here are 45mph and above 😥
|
|
|
Benji's C3
Apr 13, 2019 19:45:27 GMT -5
via mobile
Post by benji on Apr 13, 2019 19:45:27 GMT -5
I still need to pull the CVT open and remove any restrictors. I plan on maybe a new aftermarket vario and maybe upgears since I found some. Also a new belt and some random weight weights, maybe straight pipe. If I cut off the muffler, how do I rejet? It's fuel injected.
Also a new fork cuz it looks bent. Probably lower it.
|
|
|
Benji's C3
Apr 13, 2019 19:48:02 GMT -5
via mobile
Post by benji on Apr 13, 2019 19:48:02 GMT -5
Base line achieved. I'm actually slightly impressed. I assumed 33-35 just cuz age and looks.
|
|
|
Post by benji on Apr 13, 2019 19:49:44 GMT -5
These forks are definitely bent, maybe the frame too. The turning radius is slightly off. Thinking about cutting this muffler off to gain some street cred.. if anybody thinks is a bad idea, hurry up and stop me now haha.
|
|
|
Post by 190mech on Apr 13, 2019 19:53:59 GMT -5
Heard the gearing is too low for the rev limiter,eliminate both=???Solid scoot though!!
|
|
|
Post by Happypancake! on Apr 13, 2019 20:06:05 GMT -5
Check my build thread for mods.
Pull the variator spacer first.
I bought an larger injector and it sucks.
|
|
|
Benji's C3
Apr 13, 2019 20:14:34 GMT -5
via mobile
Post by benji on Apr 13, 2019 20:14:34 GMT -5
Check my build thread for mods. Pull the variator spacer first. I bought an larger injector and it sucks. I was looking through your thread. That larger injector wasn't worth it? What about rev limiter, does it have one? And how hard was that BBK install.
|
|
|
Benji's C3
Apr 13, 2019 20:15:42 GMT -5
via mobile
Post by benji on Apr 13, 2019 20:15:42 GMT -5
Will the fuel injection readjust itself if I change the muffler or intake? Or do I need to rejet it somehow?
|
|
|
Post by jbjhillbilly on Apr 13, 2019 20:33:29 GMT -5
Sweet score Benji!
|
|
|
Post by jbjhillbilly on Apr 13, 2019 20:36:06 GMT -5
Will the fuel injection readjust itself if I change the muffler or intake? Or do I need to rejet it somehow? Fuel injection should adjust within its range, but it’s not infinite.
|
|