|
Post by yourdudeness on Oct 10, 2019 19:24:50 GMT -5
I'm attempting to replace the stator on a buddy's Chongqing (gy6) 50cc scoot. I ran into a bit of a snag in removing the flywheel. I purchased a 27/24mm flywheel puller, but even the 24mm side was too big.
My caliper says it's just over 22mm with reverse threads. I found 22mm pullers in both 1.0mm and 1.5mm threads, but none with reverse threads.
Anyone have any suggestions?
|
|
|
Post by pinkscoot on Oct 11, 2019 8:40:09 GMT -5
|
|