|
Post by Delpzie on Aug 11, 2017 4:53:56 GMT -5
I have Pirelli Diablo 140/60-13 on my scooter too and from the back it looks so good and big, i wanted to get 140/70 but they didnt have in stock and also wasnt sure if it would fit.
|
|
|
Post by Delpzie on Jul 29, 2017 13:12:25 GMT -5
|
|
|
Post by Delpzie on Jul 28, 2017 18:33:50 GMT -5
On my way to VlatX something happend the scooter was runing fine i was crusing with like 80-90km/h not forcing it, then speed started dropping to 60km/h and the rpms too but it was still pulling, after that i stopped i needed to wait for my friend then i try to start it up the kickstarter just goes so easy like there isnt compression , tomorrow we will disassemble to see what happend but i think the chinese bearings just died from much rpm who knows, also i might buy RHQ crankshaft and buy piston for the MHR Team 6T cylinder kit which i have and put that, i will try to sell the rms crank to get some money back.
|
|
|
Baotian
Jul 26, 2017 7:57:13 GMT -5
Post by Delpzie on Jul 26, 2017 7:57:13 GMT -5
Got new oil today, will start disassembling the scooter in 2 or 3 days.
|
|
|
Post by Delpzie on Jul 20, 2017 9:35:35 GMT -5
It will be Damian in English , btw yes there is at least one member from Macedonia my friend Vlatx .
|
|
|
Baotian
Jul 18, 2017 13:14:36 GMT -5
Post by Delpzie on Jul 18, 2017 13:14:36 GMT -5
Actually never thinked of that, thank you for pointing out Ryan will do that these days.
|
|
|
Baotian
Jul 18, 2017 12:23:28 GMT -5
Post by Delpzie on Jul 18, 2017 12:23:28 GMT -5
Yea mine is 13mm for the minarelli engine , now i have stock 16mm i mean they are pretty much the same cranks just diffrent packaging.
|
|
|
Post by Delpzie on Jul 14, 2017 19:44:41 GMT -5
Baotian Falcon 50R (BT49QT-28C) Here is my Baotian Falcon 50R swapped with minarelli LC engine from Yamaha Aerox as now it has: -Stage6 SportPRO MK1 70cc cylinder kit (also known as Athena Sport 70cc) -Stock chinese crank (cpi/keeway/baotian etc..) -Yasuni C21 Kevlar (just bought 1week ago) -Polini Hi-Speed Vario -Malossi MHR Ventilar -Dellorto Stage6 Black Edition 21mm carb -Polini E5 Airbox -Polini Speed Belt -Stage6 SportPro Clutch -Malossi clutch bell 107mm -Minarelli cdi (the stock cdi died from too much rpm ) Very soon i will be replacing the crankshaft with RMS Super Racing crank, Malossi Selletra innerrotor ignition, Reed Valve Stage6 V-Force3 by Tassinari, Overrange malossi vario + morini 128mm pulley (from di-tech aprilia) and porting the stage6 cylinder and the engine blocks. One older picture when it had the Polini Scooter Team2 Exhaust Video with the C21 exhaust, there are other videos too on my channel from the scooter. www.youtube.com/watch?v=DOAaXd35T_E
|
|
|
Post by Delpzie on Jul 14, 2017 19:19:10 GMT -5
Hi everyone, my name is Damjan and i come from Skopje,Macedonia. Currently im driving Baotian Falcon 50R midrace/highend tuned, im watching 90GTVert for a long time so i decided to join the forum, greetings to all tuners on the forum .
|
|