|
Baotian
Apr 29, 2018 14:04:59 GMT -5
Post by Delpzie on Apr 29, 2018 14:04:59 GMT -5
Guys do u know if aerox 100cc and the 50cc version have the same engine blocks ? Im asking this for the belt size cuz i wanna buy polini kevlar belt for 100cc aerox so if its the same blocks the belt will fit nicely on the 124mm pulley with the overrange vario. I think its the same blocks right just aerox 100cc has bigger vario and pulley and longer gears or im wrong ?
|
|
|
Baotian
Apr 22, 2018 21:14:55 GMT -5
Post by Delpzie on Apr 22, 2018 21:14:55 GMT -5
|
|
|
Baotian
Apr 22, 2018 20:16:10 GMT -5
Post by Delpzie on Apr 22, 2018 20:16:10 GMT -5
Hey guys i got malossi overrange torque pulley but cut down to 124mm and also has made holes in it, now i know there is 2 washers in the overrange set that seperates the bell a little bit from the pulley does anyone know how thick they are i cant seem to find information ? I will need to make those 2 washers cuz the guy i bought from the pulley doesnt have them. Also how wide the belt needs to be for overrange set 17,5mm or 18mm ? I will be buying malossi kevlar belt 769x18mm from peugeot.
|
|
|
Post by Delpzie on Apr 7, 2018 13:12:27 GMT -5
Yea yesterday i ordered 165-192 hopefully will be enough.
|
|
|
Baotian
Apr 2, 2018 15:42:49 GMT -5
Post by Delpzie on Apr 2, 2018 15:42:49 GMT -5
Guys currently i have 132-160 main jets , do u think that will cut it or it will need bigger main jet ? I need to wait now 4 weeks for my scooter attack order , and if the jet doesnt cut it then i will need to wait another 30 days.... what do u think will it be enough or i should just order from now 162-190 set , carb is 28mm pwk.
|
|
|
Post by Delpzie on Mar 30, 2018 8:53:51 GMT -5
Here is the new carb, it came with 120 main 48 pilot jet , i bought sets for fine tuning , the needle has JJY mark on it. Still dont know how to port this cylinder if someone can suggest i will be thankfull , i plan to port it kinda like this what do you think? That's an aluminum and nickasil cylinder? Not impossible, but very difficult and more than likely you'll chip it and need to replate it. Not this map , we will port only the exhaust and the analyzer says 30.6hp @14k but the psi is above 200 so it might not work as well will be hard to tune , im making other maps to see whats the best and still make 21-22hp on the wheel, btw porting wont be problem my friend VlatX will port it we already ported the previous nicksail cylinder sport pro so he is not newbie.
|
|
|
Post by Delpzie on Mar 29, 2018 13:38:20 GMT -5
I plan this map actually raised exhaust 19,8mm and widen 1,5mm, the port analyzer says 30,6hp which is just what i wanted .
|
|
|
Baotian
Mar 25, 2018 22:35:01 GMT -5
Post by Delpzie on Mar 25, 2018 22:35:01 GMT -5
Here is the new carb, it came with 120 main 48 pilot jet , i bought sets for fine tuning , the needle has JJY mark on it. Still dont know how to port this cylinder if someone can suggest i will be thankfull , i plan to port it kinda like this what do you think?
|
|
|
Baotian
Mar 22, 2018 13:11:51 GMT -5
Post by Delpzie on Mar 22, 2018 13:11:51 GMT -5
|
|
|
Post by Delpzie on Mar 7, 2018 18:00:06 GMT -5
How it is overkill when i drive it now with stage6 sport pro ported and it rips ..... its kinda funny that u say this overkill. What ever i will be thinking more into this timings i think even 197/131 wont be enough for 21/22hp at the wheel.
Edit: P.S 70mph is way too low for that cylinder i was getting 125km/h gps with the sport pro thats like 78mph, with this will be much more .
|
|
|
Post by Delpzie on Mar 6, 2018 20:41:45 GMT -5
Here is stock timings.
|
|
|
Post by Delpzie on Mar 6, 2018 20:38:30 GMT -5
Stock the exhaust is 21,3mm and other ports 30,6mm, with these timing it will be 19,55mm exhaust and 30,2mm other ports. This guy runs this on voca combat exhaust www.youtube.com/watch?v=CtBMvkURjbM
|
|
|
Post by Delpzie on Mar 6, 2018 15:52:20 GMT -5
Hey guys i wanna buy stage6 racing modular stock it has 18,4hp on the wheel in tests with c30, i have yasuni c21 i would like to port it so i can achieve like 20-22hp what timings would be good ? I saw guy on youtube runing 197/131 with voca combat exhaust.
|
|
|
Post by Delpzie on Feb 20, 2018 6:48:04 GMT -5
It will be good midrace setup im sure , zip is light as hell
|
|
|
Baotian
Feb 19, 2018 14:45:06 GMT -5
Post by Delpzie on Feb 19, 2018 14:45:06 GMT -5
Yea there is 86cc and 77cc the italians say the 77cc is little stronger it has little more rpm and 86cc more torque.
|
|