|
|
Post by iwannascoot on Apr 4, 2015 17:04:29 GMT -5
I have decided to try doing a build thread for my Baccio Speedy 2t. I bought it not running and have it in many pieces in my basement. Pretty much all I have done is dismantle the scoot so far. I was going to just clean it up and ride it a bit before doing a BBK but I decided to go ahead and install the BBK while I have it this far apart. I'll share a couple pics again and add a couple new ones the show what I have done so far. I'll be ordering some parts in a day or two and start the build/reassembly when the parts arrive. Here is my scoot and it came with a pipe. Does anyone know if this pipe will work well with a 70cc BBK? I sure hope so.  Here is how it looks today.  Here is the engine as it was this morning.  And after cleaning it up.  Billy |
|
|
|
Post by moofus02 on Apr 4, 2015 17:23:10 GMT -5
That pipe should work with a bbk
Sent from my SPH-L720 using proboards
|
|
|
|
Post by iwannascoot on Apr 4, 2015 20:13:43 GMT -5
|
|
|
|
Post by 90GTVert on Apr 4, 2015 21:14:48 GMT -5
That bearing should work.
|
|
|
|
Post by iwannascoot on Apr 6, 2015 12:01:01 GMT -5
|
|
|
|
Post by thatcrazyguy on Apr 6, 2015 13:10:57 GMT -5
I just bought the same one from same seller  |
|
|
|
Post by iwannascoot on Apr 6, 2015 13:17:12 GMT -5
Great crazyguy! When do you plan to have yours running?
Billy
|
|
|
|
Post by oldgeek on Apr 6, 2015 13:32:01 GMT -5
Please inspect and compare to the feebay pictures when it arrives. I purchased 2 from a different seller one time. They used the same picture as your seller did, but when mine arrived, they were nothing like what was shown in the picture. They even mention in yours that photos are stock, and actual parts may vary. I may get one myself if they are the same as pictured. |
|
|
|
Post by iwannascoot on Apr 6, 2015 13:38:37 GMT -5
Please inspect and compare to the feebay pictures when it arrives. I purchased 2 from a different seller one time. They used the same picture as your seller did, but when mine arrived, they were nothing like what was shown in the picture. They even mention in yours that photos are stock, and actual parts may vary. I may get one myself if they are the same as pictured. What was different? |
|
|
|
Post by thatcrazyguy on Apr 6, 2015 14:45:01 GMT -5
Great crazyguy! When do you plan to have yours running? Billy Ups says itll be shipped today. Every school bus that passes by is getting my hopes up and throwing them off the top of a super tall building lmao!!! |
|
|
|
Post by iwannascoot on Apr 6, 2015 14:56:04 GMT -5
Mine has already shipped. UPS says it will be here 4/8 between 11:15 and 3:15pm.
Billy
|
|
|
|
Post by thatcrazyguy on Apr 6, 2015 14:57:23 GMT -5
Mine has already shipped. UPS says it will be here 4/8 between 11:15 and 3:15pm. Billy Just got mine!! |
|
|
|
Post by oldgeek on Apr 6, 2015 16:28:48 GMT -5
Please inspect and compare to the feebay pictures when it arrives. I purchased 2 from a different seller one time. They used the same picture as your seller did, but when mine arrived, they were nothing like what was shown in the picture. They even mention in yours that photos are stock, and actual parts may vary. I may get one myself if they are the same as pictured. What was different? Ports were half the size pictured and just plain ugly finish no crosshatch, the head had no O ring, and the combustion chamber was huge and rounded. The base gaskets were nowhere close to fitting. Junk IMO. |
|
|
|
Post by iwannascoot on Apr 6, 2015 16:32:13 GMT -5
Well that is not a bit good.
Crazy, how does yours look?
Billy
|
|
|
|
Post by thatcrazyguy on Apr 6, 2015 16:42:34 GMT -5
Mine looks just like the picture shown. Ports look alright
|
|
