|
|
Post by PIG on Nov 11, 2015 17:23:14 GMT -5
I'm pretty sure my carb is actually from a KX85, not a CR85. I found this little bit of info that may help some of us out.   |
|
|
|
Post by iwiketuddlz on Nov 12, 2015 6:11:44 GMT -5
Ryan runs the NAPF and says its rich i run the N80f and its seems rich as well being I run it on the top clip...
Don't run the JJH !!!! Or not in the top clip Anyhow
I have the same carb as you sir!!!
|
|
|
|
Post by PIG on Nov 12, 2015 11:39:27 GMT -5
Mines the leanest on that list (NAQG) and its feels really good. With that said i'll be going to way hotter set up, so time will tell i guess.
|
|
|
|
Post by PIG on Nov 13, 2015 11:57:32 GMT -5
I sold a carb and a set of paddle tires i still had from my banshee the other day. So turned that cash into a MVT DD19 inner rotor. Gonna go through the garage and basement this weekend to see if can round up some more cash for a Yasuni C21.
|
|
|
|
Post by spaz12 on Nov 13, 2015 13:21:57 GMT -5
That scoot is turning into a beast!
|
|
|
|
Post by PIG on Nov 13, 2015 13:33:30 GMT -5
I'm gonna go all out this go round. I've had the street and race set ups, its time to get in hyper race arena. Now only if my top end would come back in stock. I may have to switch my order to the Polini Evo 3. but i really want that Metrakit Pro Race 3
|
|
|
|
Post by spaz12 on Nov 13, 2015 13:36:24 GMT -5
I think that you should wait it out. Besides, it's getting cold up there so you probably wont e riding much longer anyway. If it's not back in stock in two months than get the Polini. Just my two cents  |
|
|
|
Post by PIG on Nov 13, 2015 15:41:32 GMT -5
I think that you should wait it out. Besides, it's getting cold up there so you probably wont e riding much longer anyway. If it's not back in stock in two months than get the Polini. Just my two cents That's my thoughts as well. It just would of been nice to get a few miles on the set up. But then again if this winter is like last years, I'll get a few days off testing in. There wasn't a month I didn't get at least one day of riding in last winter. And I've always got the prebug if need to get my scoot fix. |
|
|
|
Post by PIG on Nov 17, 2015 16:22:08 GMT -5
|
|
|
|
Post by spaz12 on Nov 17, 2015 19:08:51 GMT -5
I've been told that this is an amazing cylinder. I think you'll really like it. The only reason I didn't go for it was that I was afraid to mill out the area for the crank on my hard to get Aerox cases. I was scaaard
|
|
|
|
Post by iwiketuddlz on Nov 18, 2015 9:11:51 GMT -5
Damn son!! That is a nice setup!!! Hell it has the same crank specs as my EVO.!!!
|
|
|
|
Post by PIG on Nov 18, 2015 16:55:15 GMT -5
It's not sounding like the Pro Race is gonna happen. I'm still dealing on the TPR 86, but I should know by tomorrow. Who ever is on top of that speed list don't get to comfy, I'm coming for ya! Lol.
|
|
|
|
Post by Lucass2T on Nov 19, 2015 9:16:45 GMT -5
Really curious about that TPR86! Everyone always goes with the big (expensive!) brands like Malossi, Polini, Metrakit etc. But as far as i know Top Performaces is also real quality! You won't buy any chinese junk from them!
I think their alu cylinders come from the Athena foundry. Cranks idk but i can guarantee ya they got that covered good as well! They have the Moto tassinari v-force reeds, Mikuni TM carbs, gear sets and special racing gearcase covers.
|
|
|
|
Post by PIG on Nov 19, 2015 12:42:53 GMT -5
It's a done deal, the TPR 86 is coming my way. I'm thinking about getting the Roost R86 pipe to go with it. Does anyone have any suggestions for a pipe? I've never had anything over 70cc so I'm not sure what pipes will work with the bigger cc stuff. Is the Yasuni C21 still an option for me, or is that a no go now?
|
|
|
|
Post by Jwhood on Nov 19, 2015 12:59:20 GMT -5
Yeah id go with a yasuni,or ive even seen 90+ running roosts on those 2fast cylinders,either one is still a hard decision too pick which one too use
|
|
