|
|
Post by jbjhillbilly on Aug 1, 2021 20:36:15 GMT -5
Oil change on a customer’s LX150. Don’t know about you, but I think this is entirely too much oil in the airbox.  |
|
|
|
Post by aeroxbud on Aug 1, 2021 22:59:52 GMT -5
Oil change on a customer’s LX150. Don’t know about you, but I think this is entirely too much oil in the airbox. Been doing wheelies? |
|
|
|
Post by jbjhillbilly on Aug 2, 2021 0:28:03 GMT -5
Oil change on a customer’s LX150. Don’t know about you, but I think this is entirely too much oil in the airbox. Been doing wheelies? Well that would explain the scrapes on the bike. |
|
winner3ty
Scoot Enthusiast
2 Strokes for life
Posts: 324
|
Post by winner3ty on Aug 14, 2021 9:00:55 GMT -5
Ordered 2 sets of EU blinker assy's for our 2 Kymco Super 9's. Unlike ours they have bulbs, sockets, and a connection for our 2 connectors in the wiring harness. Plug and play installation and I will be removing my blinkers from the handlebar. Since both of ours are bashed up by bad owners, we need atleast 1 to replace the lense, or in my dads case the whole assembly (which have no bulb or socket / connector). so it makes more sense to order 2 since the shipping will kill you either way. Anyhow this is our plan, hopefully it doesn't take a month to get here lol. I also have a Leovince ZX for a kymco top boy horizontal. I only need to fabricate a mounting plate and use some spacers.  Connections on the lighting wiring harness  |
|
|
|
Post by pinkscoot on Aug 14, 2021 9:57:43 GMT -5
I finally bought my scooters an window air conditioner. They were getting so hot and sweaty when I was at work they they would do nothing but complain. Oh and it makes working in the shop very bearable for me. I also picked up an impact gun and extended magnetic impact sockets. It makes pulling a CVT a breeze.
|
|
|
|
Post by collinsd84 on Aug 15, 2021 14:33:40 GMT -5
Switches installed, everything working with pinkscoot doing all the work except for holding things and making sure they were lined up. I'd say the difficulty level of the job would have been a 9 out of 10 at my mechanical skill level. I would have lost screws. Maybe not got it back together, hence how beat up the plastics are. "Hey Santa," new plastics? The speedo had to come loose from the handlebar to get the start switch out. Job done with a nice ride. Thanks for your help. pinkscoot |
|
|
|
winner3ty
Scoot Enthusiast
2 Strokes for life
Posts: 324
|
Post by winner3ty on Sept 11, 2021 17:08:12 GMT -5
About to order a Arrow Limited for my Kymco Zx50. anything I need to know? what would be a ball park jetting for a stock 49cc bore, what would be a ballpark roller weight? Thanks!
|
|
|
|
Post by aeroxbud on Sept 11, 2021 18:03:30 GMT -5
|
|
winner3ty
Scoot Enthusiast
2 Strokes for life
Posts: 324
|
Post by winner3ty on Sept 11, 2021 18:06:11 GMT -5
|
|
|
|
Post by aeroxbud on Sept 11, 2021 18:19:29 GMT -5
|
|
winner3ty
Scoot Enthusiast
2 Strokes for life
Posts: 324
|
Post by winner3ty on Sept 16, 2021 15:43:04 GMT -5
Went and ordered an Arrow for my ZX50, PS: They are about to get another shipment of 100 of these, more or less. but the price went up 40 dollars. nows the last chance to get them before price goes up.
|
|
|
|
Post by oldgeek on Sept 16, 2021 20:24:50 GMT -5
Went and ordered an Arrow for my ZX50, PS: They are about to get another shipment of 100 of these, more or less. but the price went up 40 dollars. nows the last chance to get them before price goes up. Get yourself some stiff clutch springs, you going to need them.  |
|
winner3ty
Scoot Enthusiast
2 Strokes for life
Posts: 324
|
Post by winner3ty on Sept 16, 2021 21:01:57 GMT -5
I'll rejet and see what it needs. probably rollers and clutch springs. we shall see
|
|
|
|
Post by sToRm on Sept 21, 2021 18:08:05 GMT -5
Got a set of brake controls.  |
|
