|
|
Post by blaq on Feb 28, 2016 8:08:12 GMT -5
|
|
|
|
Post by blaq on Feb 28, 2016 8:11:11 GMT -5
|
|
|
|
Post by blaq on Feb 28, 2016 8:12:39 GMT -5
|
|
|
|
Post by Clank on Feb 28, 2016 8:18:09 GMT -5
Huh? What are you doing selling something? What the hell are those things? How does it make trying new products out on my scooter easier? Do you throw them in the gas tank or do you mix em with your turn signal fluid?
|
|
|
|
Post by blaq on Feb 28, 2016 8:42:51 GMT -5
For applying something like lights or whatever if you don't like it that's just your cup of tea someone else may find these useful.
|
|
tvnacman
Scoot Enthusiast
Posts: 408
Location: NYC
|
Post by tvnacman on Feb 28, 2016 8:50:45 GMT -5
|
|
|
|
Post by 90GTVert on Feb 28, 2016 10:20:16 GMT -5
Looks interesting to me. I'll probably continue soldering or using connectors, or simply twisting and electrical taping for a quick test, but if they were cheap enough I may pick some up if I see them sometime. Thanks for sharing. I had a friend that couldn't make a proper crimp connection to save his life. I was in the truck on his first test ride after an engine swap when the truck died because a wire come completely out of a butt connector. I eventually got him to figure it out, never did see what was so difficult, but he sure could have used a pack of these. Same guy set his truck on fire while we were racing a friend because he failed to route a wire away from headers. I suppose he could also use a pack or maybe pallet load of good sense to complete his wiring toolbox if you know of any retailers.  Just as a confidence booster to all of you travelers, he's done maintenance in hotels for the majority of his working life. Think about that next time you're all cozy in a hotel room. |
|
|
|
Post by Clank on Feb 28, 2016 10:26:46 GMT -5
For applying something like lights or whatever if you don't like it that's just your cup of tea someone else may find these useful. oh it's something to do with electrical connections? Well why didn't you say so? It was a bit confusing at first. I honestly had no clue what they where. |
|
|
|
Post by blaq on Feb 28, 2016 12:26:56 GMT -5
These are for those that dont feel like or cant solder also if your the ppl who hook up your ride with bells and whistles and want to sell your ride disassemble is heaven and less of a headache for you and the buyer
|
|
Kwcslvr
Scoot Junior
Posts: 6 
Location: My Nomad
|
Post by Kwcslvr on Mar 1, 2016 20:43:37 GMT -5
Looks interesting to me. I'll probably continue soldering or using connectors, or simply twisting and electrical taping for a quick test, but if they were cheap enough I may pick some up if I see them sometime. Thanks for sharing. I agree with Brent there, but I managed to pick up a multi-pack of these sort of connectors (as he has pictured) a few years back. I've kept a few of them in my vehicles for emergencies since. Successfully & conveniently used them a few times. |
|
|
|
Post by Thunder 50 Rider on Jul 7, 2016 22:04:42 GMT -5
those look nice for testing different components, i was watching a vid on those the other day and thought they seemed like a great little connector. i have seen something like those in the past and which continue to be used regularly in the electrical trade called scotchlocks, but these seem like a better connection and a far better design, without actually seeing them used in person.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2016 22:13:17 GMT -5
Can it core an apple?  looks like a butt connector instead of squeezing it you screw it. And it does not look like one size fits all. John Ohhh yes...it can core a apple. Great sketch. Bill |
|
|
|
Post by blaq on Jul 7, 2016 22:29:15 GMT -5
They helped tremendously when putting in relays for my lights
|
|
|
|
Post by Thunder 50 Rider on Jul 7, 2016 22:36:41 GMT -5
did you use the weatherproof or normal? i actually would like to get the mini fuse holder that you can add to the kit to replace the normal round fuse that came with my scoot
|
|
|
|
Post by johnwing on Sept 16, 2016 7:45:54 GMT -5
I have used them and they work great! very easy to use you can take them apart if you have to they hold the wires great there's no soldering the vibration proof you can even get them waterproof.
John
|
|
Just as a confidence booster to all of you travelers, he's done maintenance in hotels for the majority of his working life. Think about that next time you're all cozy in a hotel room.
