|
|
Post by Jwhood on Jun 28, 2016 18:24:11 GMT -5
Here was one of the ones I was looking at before I found out aftermarket parts were next to none,also Brandon here is the endy exhaust,I think that's pm tuning in house pipe?   |
|
|
|
Post by aeroxbud on Jun 29, 2016 6:06:10 GMT -5
I know the endy pipes never seem to do well on 50 or 70cc bikes. The dyno graph looks quite good though. Custom pipes are real hard to build on two strokes, I look forward to seeing what you come up with. Whatever happens it a mad build  |
|
|
|
Post by Chris Cristini on Jul 1, 2016 18:49:05 GMT -5
|
|
|
|
Post by joeorange on Jul 3, 2016 19:05:39 GMT -5
i would LOVE to have that engine. if i had the money id grab the first one i found, but alas, never enough money.
|
|
|
|
Post by scooterswapshop on Jul 14, 2016 9:56:06 GMT -5
I sent the motor off to mvs and he's going to port the stock bores. I figure he can get 3-5hp from porting alone. They are 15 stock. Then doing pipes, lightened flywheel, twin carbs should net me another 2-4. Should put me around 20-24hp. That's perfect. I'm not looking for some insane power, as I want it steetable and reliable. I ride all my builds so they need to hold up. I have aerox disk wheels and Paoli race legs in transit. Once I get the wheel I can have the custom Hub machined to fit
|
|
|
|
Post by scooterswapshop on Jul 14, 2016 9:56:42 GMT -5
|
|
|
|
Post by scooterswapshop on Jul 14, 2016 9:58:02 GMT -5
|
|
|
|
Post by spaz12 on Jul 14, 2016 10:29:56 GMT -5
Malossi forks? Are they 30 or 33mm?
|
|
|
|
Post by scooterswapshop on Jul 14, 2016 10:37:50 GMT -5
These are 33 I think I forget. These actually might go on the f12 big evo and I might take the Paoli race legs off the f12 to put on the twin build. Adjustable race legs belong on track bikes
|
|
|
|
Post by Jwhood on Jul 14, 2016 20:18:37 GMT -5
Man can't wait too see final build its gonna look sweet
|
|
|
|
Post by birdman on Jul 15, 2016 0:05:19 GMT -5
|
|
|
|
Post by scooterswapshop on Jul 18, 2016 7:55:03 GMT -5
I was hoping to find a title and frame so I didn't have to gut a clean bIke but no such luck. Aerox wheels and hub should arrive this week. Once I get the hub machined to fit aerox wheel I'll be able to start tearing down and doing mockup What's funny about this build is I've got someone going around saying I can only do bolt on stuff  , no skill whatsoever. Done about 6 pretty extensive one off swapped bikes in the last couple years. Just funny none of it's too hard if you take your time and you have the right tools. |
|
|
|
Post by Jwhood on Jul 18, 2016 8:45:46 GMT -5
Always gonna be haters no matter what you do,Some of the stuff I seen on your f.b page is awesome,just keep building and shut the haters down bro!!!
|
|
|
|
Post by 90GTVert on Jul 19, 2016 18:22:16 GMT -5
I've got someone going around saying I can only do bolt on stuff Could be worse. Most of my builds are screwed.  |
|
|
|
Post by scooterswapshop on Jul 19, 2016 19:05:47 GMT -5
|
|
, no skill whatsoever. Done about 6 pretty extensive one off swapped bikes in the last couple years. Just funny 
