|
|
Post by ryan_ott on Mar 31, 2018 19:44:00 GMT -5
Thanks PIGI’ve spent a lot of time in the tuning details getting things just right and it shows. It may seem like the rpm and rollers are off but I can tell you this pulls much better where I’m at now (9,800) compared to when I had it tuned in the 10,500-11,000 range. It’s got really good torque. It just takes time to fine what the pipe and cylinder like. This fat ol’ girl will actually get the front wheel light. Once back together I’ll get some more videos up. tsimi These are in the $50-60 range. I actually had this on my Elite, sold it to spaz and got it back for the Zuma. They work well and are compact. eBay has $10 cheapies but they look it too. |
|
|
|
Post by ryan_ott on Apr 10, 2018 11:03:26 GMT -5
|
|
|
|
Post by ryan_ott on Apr 10, 2018 17:01:58 GMT -5
|
|
|
|
Post by tsimi on Apr 10, 2018 18:27:38 GMT -5
That bracket looks thin on the pics. Is it sturdy enough to handle a larger amount of stress? For example when braking suddenly hard at higher speeds.
I also need that Stage6 rear stand. Gotta write that down on my still to get list.
|
|
|
|
Post by ryan_ott on Apr 10, 2018 19:41:22 GMT -5
I’m not worried about it, I think the sheer strength of steel is sufficient. It’s thicker then the shiny paint gives the illusion of. I gave it a good test seating the pads and it’s just fine.
I got my stand for a good deal. Buy one get one free, they are packed 2 to a box originally.
|
|
|
|
Post by tsimi on Apr 10, 2018 22:45:17 GMT -5
Something else...
How hot does the radiator liquid get? Found some hose here saying up to 60 degrees celcius. Is that enough?
|
|
|
|
Post by 90GTVert on Apr 11, 2018 5:26:27 GMT -5
I don't know exactly how hot your setup will run, but most radiator/heater hoses are rated to at least 250F/120C.
|
|
|
|
Post by PIG on Apr 11, 2018 11:07:25 GMT -5
On my one radiator set up The hottest I’d see was 160f
|
|
|
|
Post by spaz12 on Apr 12, 2018 18:20:55 GMT -5
That came out looking pretty good  |
|
|
|
Post by ryan_ott on May 3, 2018 16:28:58 GMT -5
Not much going on here. Rear disc is working nicely. I did order a set of matching adelin calipers on the slow boat from China. Did some carb and cvt tuning with the nice weather this week and racked up some miles today. I think my silencer needs to be repacked already. Full throttle it’s getting pretty loud. Not horrible yet but soon it needs attention.  |
|
|
|
Post by Lucass2T on May 3, 2018 17:09:26 GMT -5
That thing looks super clean!
|
|
|
|
Post by ryan_ott on May 3, 2018 19:58:42 GMT -5
That thing looks super clean! Thanks man! I catch myself going to the garage just to look then go back inside. I know, I’ve got problems  |
|
|
|
Post by ryan_ott on May 3, 2018 21:12:34 GMT -5
|
|
|
|
Post by Lucass2T on May 4, 2018 1:01:31 GMT -5
Yeah thats a nice health pack. Don't forget a tire repair set. You don't want to be leaving your scoot somewhere for the night because of a puncture.
|
|
|
|
Post by ryan_ott on May 4, 2018 5:14:28 GMT -5
I did think about throwing one in there but I also get free towing with my insurance. For the long rides it couldn’t hurt. Anyone ever try to fill a scoot tire from one of the co2 canisters things?
|
|
