|
|
Post by fly on May 5, 2017 20:17:23 GMT -5
I chucked my passenger pegs. Don't need em. Wouldn't pay for em. Riding 2 up on a scoot is illegal here, anyway. And the floor board has built ins that are a little smaller but would work in a pinch as well. So, they're pretty redundant for me.
|
|
|
|
Post by moofus02 on May 5, 2017 20:18:47 GMT -5
I think you have extra wheels also... Ok I'll stop harassing you  Kinda lol aerox 100 wheels that bolt on, aerox 50 wheels to go with the aerox motor, stage 6 forks, aerox forks, 103 Zuma motor etc. Yes I've got spares lol. |
|
|
|
Post by spaz12 on May 5, 2017 20:32:24 GMT -5
I chucked my passenger pegs. Don't need em. Wouldn't pay for em. Riding 2 up on a scoot is illegal here, anyway. And the floor board has built ins that are a little smaller but would work in a pinch as well. So, they're pretty redundant for me. I like the pegs being there because of the hole they leave when removed. Hell, I stole a pair off a scoot I sold, after I sold it  |
|
|
|
Post by joshua864 on May 5, 2017 22:31:17 GMT -5
I think you have extra wheels also... Ok I'll stop harassing you Kinda lol aerox 100 wheels that bolt on, aerox 50 wheels to go with the aerox motor, stage 6 forks, aerox forks, 103 Zuma motor etc. Yes I've got spares lol. Wait you have stage6 forks to spare? Why do I just now know this! |
|
|
|
Post by joshua864 on May 5, 2017 22:32:53 GMT -5
I chucked my passenger pegs. Don't need em. Wouldn't pay for em. Riding 2 up on a scoot is illegal here, anyway. And the floor board has built ins that are a little smaller but would work in a pinch as well. So, they're pretty redundant for me. I like the pegs being there because of the hole they leave when removed. Hell, I stole a pair off a scoot I sold, after I sold it That was the reason I wanted a pair also even though mine were broken at the hole and with the broken piece in there didn't look half bad it bothered me |
|
|
|
Post by moofus02 on May 6, 2017 2:10:30 GMT -5
I broke my right peg in an unplanned low side that cracked a few ribs. It's still there I just broke out the bottom of one of the screw holes. I ride with my feet on them when the floor is full of stuff or I just want to tuck in it gets me in a sport bike position lol
|
|
|
|
Post by benji on May 6, 2017 4:56:48 GMT -5
That's why I don't have em. I'm afraid pegs will get me caught or will catch my leg or something.
|
|
|
|
Post by moofus02 on May 6, 2017 5:13:30 GMT -5
That's why I don't have em. I'm afraid pegs will get me caught or will catch my leg or something. The peg on a bug eye are just plastic pieces that mount on top of the floor board where it wraps around the side of the seat bucket, they don't hang down but have a raised part that your heal can grab. The problem is they are just a bit wider than the floor so when the bike goes down they snag and break the bottom out of the attachment holes |
|
|
|
Post by ryan_ott on May 6, 2017 20:48:02 GMT -5
|
|
|
|
Post by PIG on May 6, 2017 21:32:56 GMT -5
For the price I don't think anything will beat a TPR 86. They rip
|
|
|
|
Post by joshua864 on May 6, 2017 21:53:00 GMT -5
Today I got my lamp sockets so I could get the turn signals in the tail light. I'm still waiting on amber lenses but that's a easy swap. There are a few spots to choose I decided to use the inward flat surface so my rubber sockets would sit flat. Mark, drill, a dap of sealant for extra protection and your off to the races. Speaking of races, I put a few miles on it today with the oil infused exhaust and that sure is smokey once it gets heated up. Boy the looks I was getting. I'm still debating on what route I want to go with the motor. I might be waiting until the winter to do the LC motor so im not rushed... Even so still haven'treally looked at cylinders, but the TPR86 hmmm.     As it sits today, panel free.  Blinkie - blink youtu.be/SXXijNPKaHsWait so that tailight didn't come with the bulb sockets already in? |
|
|
|
Post by ryan_ott on May 6, 2017 21:57:50 GMT -5
I'm actually heavily considering the TPR 86 or the Metrakit pro race 3 but that's only 70. I've got the little Polini I might throw on there until winter then build the motor properly.
|
|
|
|
Post by ryan_ott on May 6, 2017 21:58:40 GMT -5
No not the turn signals.
|
|
|
|
Post by joshua864 on May 6, 2017 21:58:45 GMT -5
Today I got my lamp sockets so I could get the turn signals in the tail light. I'm still waiting on amber lenses but that's a easy swap. There are a few spots to choose I decided to use the inward flat surface so my rubber sockets would sit flat. Mark, drill, a dap of sealant for extra protection and your off to the races. Speaking of races, I put a few miles on it today with the oil infused exhaust and that sure is smokey once it gets heated up. Boy the looks I was getting. I'm still debating on what route I want to go with the motor. I might be waiting until the winter to do the LC motor so im not rushed... Even so still haven'treally looked at cylinders, but the TPR86 hmmm. As it sits today, panel free. Blinkie - blink youtu.be/SXXijNPKaHsWait so that tailight didn't come with the bulb sockets already in?  I was looking at this one and it looks like it has them already but thought this was the same one you purchased |
|
|
|
Post by ryan_ott on May 6, 2017 22:01:34 GMT -5
For about $12 you can make it yourself. Amber lenses and the lamp pig tails. This is just the stock setup b
|
|
